English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
غرفة نظيفة الوصول الباب نافذة المراقبة
A fixed flush vision panel engineered for cleanroom personnel doors, supporting safe two-way visibility without introducing exposed beads or ledges.
- Two-Way Personnel Visibility
- Flush Door Integration
- Impact Safety Glass
- Sealed Rounded Corners
مقدمة المنتج
This observation panel is built into a hinged or sliding cleanroom access door at the operator sightline. The glazing unit is retained inside the reinforced door leaf, and both exposed faces finish flush for cleaning and traffic safety. Unlike a transfer-hatch pane, its proportions and mounting address personnel visibility, door movement, repeated closing shock and potential cart contact. Rectangular, narrow vertical and radiused-corner formats can be coordinated with the door construction.
الخصائص الرئيسية
Flush retainers avoid projecting beads that can catch garments or cleaning cloths.
Resilient glazing support isolates the pane from repeated door-closing vibration.
Laminated or tempered safety-glass options address impact exposure in busy access routes.
مخاوف المنتج للعملاء
Door glazing must remain aligned and sealed under repeated movement while providing a clear approach sightline and a safe impact response.
Personnel cannot see someone approaching from the opposite side of an opaque door.The pane is positioned at a practical sightline and provides clear two-way visibility.
Repeated slamming loosens snap-in glazing beads and perimeter seals.A reinforced internal retainer and continuous resilient seals isolate the pane from door shock.
Square projecting trim catches garments and is difficult to wipe around.Flush or radiused exposed edges maintain a smooth door face.
تطبيقات نموذجية
Cleanroom personnel doorsGowning-room access doorsLaboratory corridor doorsHospital clean-area entrances
المعلمات الفنية
Typical cleanroom access-door observation-window dimensions and materials are listed below.
| المواد الأساسية | Tempered or laminated safety glass in a reinforced cleanroom door-leaf frame |
|---|---|
| سمك اللوحة | 6–16 mm glazing; 40–60 mm typical door-leaf frame depth |
| العرض الفعال | 200–700 mm clear viewing width |
| الحد الأقصى الطول | 1800 mm vertical vision-panel height |
| الصلب يواجه سمك | 0.8–1.5 mm stainless or coated-steel door retainers |
| الكثافة الأساسية | Approximately 2500 kg/m³ for standard safety glass |
| الموصلية الحرارية | Approximately 1.0 W/(m·K) for monolithic glass |
| إنهاء السطح | Clear glass with brushed stainless or color-matched flush door trim |
| نوع المشترك | Reinforced flush door-leaf aperture with concealed retainer and continuous resilient glazing seal |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Narrow vertical or rectangular paneTempered laminated safety glassRadiused or square cornersIntegral blind, smart or specialist glazing
Planning a Cleanroom Access Door Observation Window specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
