English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
اكسسوارات تركيب الغرف النظيفة
القيد تعليق السقف
A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.
- Continuous Height Adjustment
- Positive Locknut Setting
- Zinc-Plated Steel
- Clevis Grid Connection
مقدمة المنتج
The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.
الخصائص الرئيسية
Paired nuts and washers secure the selected setting.
A pinned lower clevis accommodates common ceiling-channel interfaces.
Zinc plating provides practical corrosion resistance for concealed interior service.
مخاوف المنتج للعملاء
Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.
Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.
Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.
Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.
Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.
تطبيقات نموذجية
Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels
المعلمات الفنية
Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.
| المواد الأساسية | Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis |
|---|---|
| سمك اللوحة | 40-150 mm compatible ceiling-panel thickness |
| العرض الفعال | 20-60 mm compatible ceiling-channel engagement width |
| الحد الأقصى الطول | Up to 3000 mm threaded rod length |
| الصلب يواجه سمك | 3.00-8.00 mm anchor plate and clevis component thickness |
| الكثافة الأساسية | Approximately 7850 kg/m³ for carbon-steel hardware |
| الموصلية الحرارية | Approximately 45-60 W/(m·K) for carbon steel |
| إنهاء السطح | Silver zinc-plated steel or optional passivated stainless steel |
| نوع المشترك | Threaded anchor connection with locknuts and pinned clevis-to-channel attachment |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting
Planning a Ceiling Suspension Rod specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
