Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Techo de suspensión Rod
A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.
- Continuous Height Adjustment
- Positive Locknut Setting
- Zinc-Plated Steel
- Clevis Grid Connection
Introducción del producto
The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.
Características clave
Paired nuts and washers secure the selected setting.
A pinned lower clevis accommodates common ceiling-channel interfaces.
Zinc plating provides practical corrosion resistance for concealed interior service.
Preocupaciones del producto del cliente
Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.
Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.
Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.
Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.
Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.
Aplicaciones típicas
Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels
Parámetros técnicos
Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.
| Materiales Core | Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis |
|---|---|
| Panel de espesor | 40-150 mm compatible ceiling-panel thickness |
| Ancho efectivo | 20-60 mm compatible ceiling-channel engagement width |
| Longitud máxima | Up to 3000 mm threaded rod length |
| Acero frente a espesor | 3.00-8.00 mm anchor plate and clevis component thickness |
| Densidad Core | Approximately 7850 kg/m³ for carbon-steel hardware |
| Conductividad térmica | Approximately 45-60 W/(m·K) for carbon steel |
| Superficie acabada | Silver zinc-plated steel or optional passivated stainless steel |
| Tipo conjunto | Threaded anchor connection with locknuts and pinned clevis-to-channel attachment |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting
Planning a Ceiling Suspension Rod specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
