Three-quarter view of a threaded cleanroom ceiling suspension rod assembly

클린룸 설치 액세서리

천장 Suspension Rod

A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.

Continuous Height Adjustment
Positive Locknut Setting
Zinc-Plated Steel
Clevis Grid Connection

견적 요청 제품 찾아보기

상품 소개

The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.

주요 기능

Continuous thread permits fine elevation adjustment.

Paired nuts and washers secure the selected setting.

A pinned lower clevis accommodates common ceiling-channel interfaces.

Zinc plating provides practical corrosion resistance for concealed interior service.

고객 제품 관심사

Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.

Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.

Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.

Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.

Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.

일반적인 응용 프로그램

Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels

기술 매개변수

Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.

핵심 재료	Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis
패널 두께	40-150 mm compatible ceiling-panel thickness
유효 폭	20-60 mm compatible ceiling-channel engagement width
최대 길이	Up to 3000 mm threaded rod length
강철 면면 두께	3.00-8.00 mm anchor plate and clevis component thickness
코어 밀도	Approximately 7850 kg/m³ for carbon-steel hardware
열전도도 (Thermal Conductivity)	Approximately 45-60 W/(m·K) for carbon steel
표면 마무리	Silver zinc-plated steel or optional passivated stainless steel
접합 유형	Threaded anchor connection with locknuts and pinned clevis-to-channel attachment
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting

Planning a Ceiling Suspension Rod specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.