Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Accessoires d'installation Cleanroom
Plafond de suspension Rod par
A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.
- Continuous Height Adjustment
- Positive Locknut Setting
- Zinc-Plated Steel
- Clevis Grid Connection
Introduction de produit
The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.
Key Features
Paired nuts and washers secure the selected setting.
A pinned lower clevis accommodates common ceiling-channel interfaces.
Zinc plating provides practical corrosion resistance for concealed interior service.
Préoccupations du client produit
Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.
Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.
Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.
Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.
Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.
Les applications typiques
Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels
Paramètres techniques
Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.
| Matériaux de base | Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis |
|---|---|
| Panneau épaisseur | 40-150 mm compatible ceiling-panel thickness |
| Largeur effective | 20-60 mm compatible ceiling-channel engagement width |
| Longueur maximale | Up to 3000 mm threaded rod length |
| Acier face épaisseur | 3.00-8.00 mm anchor plate and clevis component thickness |
| Densité Core | Approximately 7850 kg/m³ for carbon-steel hardware |
| Conductivité thermique | Approximately 45-60 W/(m·K) for carbon steel |
| surface finie | Silver zinc-plated steel or optional passivated stainless steel |
| Type joint | Threaded anchor connection with locknuts and pinned clevis-to-channel attachment |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting
Planning a Ceiling Suspension Rod specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
