Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Installation Zubehör
Decken Suspension Rod
A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.
- Continuous Height Adjustment
- Positive Locknut Setting
- Zinc-Plated Steel
- Clevis Grid Connection
Produkteinführung
The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.
Key Features
Paired nuts and washers secure the selected setting.
A pinned lower clevis accommodates common ceiling-channel interfaces.
Zinc plating provides practical corrosion resistance for concealed interior service.
Kunden Produktbedenken
Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.
Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.
Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.
Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.
Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.
Typische Anwendungen
Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels
Technische Parameter
Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.
| Core Material | Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis |
|---|---|
| Panel Dicke | 40-150 mm compatible ceiling-panel thickness |
| Effektive Breite | 20-60 mm compatible ceiling-channel engagement width |
| Maximale Länge | Up to 3000 mm threaded rod length |
| Stahl facing Dicke | 3.00-8.00 mm anchor plate and clevis component thickness |
| Kerndichte | Approximately 7850 kg/m³ for carbon-steel hardware |
| Thermische Leitfähigkeit | Approximately 45-60 W/(m·K) for carbon steel |
| Oberfläche Finish | Silver zinc-plated steel or optional passivated stainless steel |
| Gemeinsamer Typ | Threaded anchor connection with locknuts and pinned clevis-to-channel attachment |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting
Planning a Ceiling Suspension Rod specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
