Three-quarter view of a threaded cleanroom ceiling suspension rod assembly

クリーンルームの設置付属品

Ceiling サスペンションロッド

A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.

Continuous Height Adjustment
Positive Locknut Setting
Zinc-Plated Steel
Clevis Grid Connection

見積もりリクエスト製品案内

商品紹介

The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.

主要な特徴

Continuous thread permits fine elevation adjustment.

Paired nuts and washers secure the selected setting.

A pinned lower clevis accommodates common ceiling-channel interfaces.

Zinc plating provides practical corrosion resistance for concealed interior service.

お客様の製品に関する懸念事項

Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.

Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.

Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.

Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.

Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.

典型的な用途

Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels

技術的なパラメータ

Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.

コア材料	Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis
パネルの厚さ	40-150 mm compatible ceiling-panel thickness
有効幅	20-60 mm compatible ceiling-channel engagement width
最大長さ	Up to 3000 mm threaded rod length
鋼鉄の厚さを直面する	3.00-8.00 mm anchor plate and clevis component thickness
コア密度	Approximately 7850 kg/m³ for carbon-steel hardware
熱伝導率	Approximately 45-60 W/(m·K) for carbon steel
表面仕上げ	Silver zinc-plated steel or optional passivated stainless steel
ジョイントタイプ	Threaded anchor connection with locknuts and pinned clevis-to-channel attachment
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting

Planning a Ceiling Suspension Rod specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する