Three-quarter view of a threaded cleanroom ceiling suspension rod assembly

Aksesori Pemasangan Bilik Bersih

Rod Suspensi Siling

A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.

Continuous Height Adjustment
Positive Locknut Setting
Zinc-Plated Steel
Clevis Grid Connection

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.

Ciri-ciri Utama

Continuous thread permits fine elevation adjustment.

Paired nuts and washers secure the selected setting.

A pinned lower clevis accommodates common ceiling-channel interfaces.

Zinc plating provides practical corrosion resistance for concealed interior service.

Kebimbangan Produk Pelanggan

Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.

Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.

Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.

Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.

Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.

Permohonan yang biasa

Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels

Parameter teknikal

Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.

Bahan Teras	Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis
Ketebalan Panel	40-150 mm compatible ceiling-panel thickness
Lebar berkesan	20-60 mm compatible ceiling-channel engagement width
Panjang maksimum	Up to 3000 mm threaded rod length
Keluli Menghadapi Ketebalan	3.00-8.00 mm anchor plate and clevis component thickness
Ketumpatan teras	Approximately 7850 kg/m³ for carbon-steel hardware
Kekonduksian Terma	Approximately 45-60 W/(m·K) for carbon steel
Kemasan permukaan	Silver zinc-plated steel or optional passivated stainless steel
Jenis Bersatu	Threaded anchor connection with locknuts and pinned clevis-to-channel attachment
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting

Planning a Ceiling Suspension Rod specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami