English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Аксессуары для установки в чистых помещениях
Подвеска потолка
A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.
- Continuous Height Adjustment
- Positive Locknut Setting
- Zinc-Plated Steel
- Clevis Grid Connection
Введение продукции
The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.
Основные характеристики
Paired nuts and washers secure the selected setting.
A pinned lower clevis accommodates common ceiling-channel interfaces.
Zinc plating provides practical corrosion resistance for concealed interior service.
Обеспокоенность клиентов продуктами
Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.
Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.
Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.
Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.
Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.
Типичные приложения
Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels
Технические параметры
Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.
| Основной материал | Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis |
|---|---|
| Толщина панели | 40-150 mm compatible ceiling-panel thickness |
| эффективная ширина | 20-60 mm compatible ceiling-channel engagement width |
| Максимальная длина | Up to 3000 mm threaded rod length |
| Толщина линий стали | 3.00-8.00 mm anchor plate and clevis component thickness |
| Плотность ядра | Approximately 7850 kg/m³ for carbon-steel hardware |
| Теплопроводимость | Approximately 45-60 W/(m·K) for carbon steel |
| Поверхностная отделка | Silver zinc-plated steel or optional passivated stainless steel |
| Объединенный тип | Threaded anchor connection with locknuts and pinned clevis-to-channel attachment |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting
Planning a Ceiling Suspension Rod specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
