English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
A التلقائي سوينغ باب المشغل
An overhead electromechanical operator that automates cleanroom swing doors and coordinates activation, safety, access-control and interlock signals.
- Programmable Door Motion
- Access-Control Interface
- Push or Pull Arm Options
- Airlock Sequence Ready
مقدمة المنتج
The automatic swing door operator combines a geared motor, control board and spring-assisted drive inside a compact aluminum header. Opening angle, hold-open time and travel speed can be programmed for the door leaf, while sensor and access inputs coordinate touchless activation and controlled entry. The operator closes the door through a monitored motion profile and can be integrated with electric locking and interlock logic for cleanroom airlocks.
الخصائص الرئيسية
Programmable speed and dwell settings adapt the cycle to personnel flow and contamination-control needs.
Dedicated inputs accept presence sensors, access readers, emergency release and door-position feedback.
Push-arm and pull-arm arrangements support inward- or outward-opening cleanroom layouts.
مخاوف المنتج للعملاء
Automating a sealed swing door requires controlled torque, sensor coordination and reliable return to the closed position.
Users touch handles and contaminate gloves when moving between controlled rooms.The operator accepts touchless, card-reader or remote activation inputs.
A high-resistance seal causes inconsistent opening or incomplete closing.Programmable drive torque and closing profile are matched to the leaf and gasket load.
Two airlock doors must not open together during normal circulation.The controller exchanges lock and door-status signals with the interlock system.
تطبيقات نموذجية
Hands-free cleanroom entrancesHospital isolation-room doorsInterlocked personnel airlocksAccessible laboratory doors
المعلمات الفنية
Representative enclosure dimensions and construction for an automatic cleanroom swing-door operator are listed below.
| المواد الأساسية | Steel gear train and drive shaft in an extruded aluminum operator chassis |
|---|---|
| سمك اللوحة | Approximately 110–120 mm operator depth |
| العرض الفعال | Approximately 100–125 mm header height |
| الحد الأقصى الطول | Approximately 610 mm for a single operator module |
| الصلب يواجه سمك | 1.5–2.0 mm removable aluminum or stainless-effect header cover |
| الكثافة الأساسية | Approximately 2700 kg/m³ for the aluminum chassis |
| الموصلية الحرارية | Approximately 160–205 W/(m·K) for the aluminum enclosure |
| إنهاء السطح | Clear anodized, powder-coated or stainless-effect header cover |
| نوع المشترك | Overhead header mounting with push arm, pull arm or slide-channel linkage |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Push-arm or pull-arm linkageTouchless and access-control inputsPresence-sensor interfaceSingle-door or interlocked-airlock programming
Planning a Automatic Swing Door Operator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
