Automatic swing door operator with arm and control components

Двери в чистых помещениях, окна и системы блокировки

Оператор автоматической подвижной двери

An overhead electromechanical operator that automates cleanroom swing doors and coordinates activation, safety, access-control and interlock signals.

Programmable Door Motion
Access-Control Interface
Push or Pull Arm Options
Airlock Sequence Ready

Запрос котировки Просмотреть продукты

Введение продукции

The automatic swing door operator combines a geared motor, control board and spring-assisted drive inside a compact aluminum header. Opening angle, hold-open time and travel speed can be programmed for the door leaf, while sensor and access inputs coordinate touchless activation and controlled entry. The operator closes the door through a monitored motion profile and can be integrated with electric locking and interlock logic for cleanroom airlocks.

Основные характеристики

A geared drive provides repeatable opening torque for sealed doors and pressure-loaded entrances.

Programmable speed and dwell settings adapt the cycle to personnel flow and contamination-control needs.

Dedicated inputs accept presence sensors, access readers, emergency release and door-position feedback.

Push-arm and pull-arm arrangements support inward- or outward-opening cleanroom layouts.

Обеспокоенность клиентов продуктами

Automating a sealed swing door requires controlled torque, sensor coordination and reliable return to the closed position.

Users touch handles and contaminate gloves when moving between controlled rooms.The operator accepts touchless, card-reader or remote activation inputs.

A high-resistance seal causes inconsistent opening or incomplete closing.Programmable drive torque and closing profile are matched to the leaf and gasket load.

Two airlock doors must not open together during normal circulation.The controller exchanges lock and door-status signals with the interlock system.

Типичные приложения

Hands-free cleanroom entrancesHospital isolation-room doorsInterlocked personnel airlocksAccessible laboratory doors

Технические параметры

Representative enclosure dimensions and construction for an automatic cleanroom swing-door operator are listed below.

Основной материал	Steel gear train and drive shaft in an extruded aluminum operator chassis
Толщина панели	Approximately 110–120 mm operator depth
эффективная ширина	Approximately 100–125 mm header height
Максимальная длина	Approximately 610 mm for a single operator module
Толщина линий стали	1.5–2.0 mm removable aluminum or stainless-effect header cover
Плотность ядра	Approximately 2700 kg/m³ for the aluminum chassis
Теплопроводимость	Approximately 160–205 W/(m·K) for the aluminum enclosure
Поверхностная отделка	Clear anodized, powder-coated or stainless-effect header cover
Объединенный тип	Overhead header mounting with push arm, pull arm or slide-channel linkage
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Push-arm or pull-arm linkageTouchless and access-control inputsPresence-sensor interfaceSingle-door or interlocked-airlock programming

Planning a Automatic Swing Door Operator specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой