Automatic swing door operator with arm and control components

Pintu Bilik Bersih, Windows dan Sistem Interlock

Pengendali Pintu Swing Automatik

An overhead electromechanical operator that automates cleanroom swing doors and coordinates activation, safety, access-control and interlock signals.

Programmable Door Motion
Access-Control Interface
Push or Pull Arm Options
Airlock Sequence Ready

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The automatic swing door operator combines a geared motor, control board and spring-assisted drive inside a compact aluminum header. Opening angle, hold-open time and travel speed can be programmed for the door leaf, while sensor and access inputs coordinate touchless activation and controlled entry. The operator closes the door through a monitored motion profile and can be integrated with electric locking and interlock logic for cleanroom airlocks.

Ciri-ciri Utama

A geared drive provides repeatable opening torque for sealed doors and pressure-loaded entrances.

Programmable speed and dwell settings adapt the cycle to personnel flow and contamination-control needs.

Dedicated inputs accept presence sensors, access readers, emergency release and door-position feedback.

Push-arm and pull-arm arrangements support inward- or outward-opening cleanroom layouts.

Kebimbangan Produk Pelanggan

Automating a sealed swing door requires controlled torque, sensor coordination and reliable return to the closed position.

Users touch handles and contaminate gloves when moving between controlled rooms.The operator accepts touchless, card-reader or remote activation inputs.

A high-resistance seal causes inconsistent opening or incomplete closing.Programmable drive torque and closing profile are matched to the leaf and gasket load.

Two airlock doors must not open together during normal circulation.The controller exchanges lock and door-status signals with the interlock system.

Permohonan yang biasa

Hands-free cleanroom entrancesHospital isolation-room doorsInterlocked personnel airlocksAccessible laboratory doors

Parameter teknikal

Representative enclosure dimensions and construction for an automatic cleanroom swing-door operator are listed below.

Bahan Teras	Steel gear train and drive shaft in an extruded aluminum operator chassis
Ketebalan Panel	Approximately 110–120 mm operator depth
Lebar berkesan	Approximately 100–125 mm header height
Panjang maksimum	Approximately 610 mm for a single operator module
Keluli Menghadapi Ketebalan	1.5–2.0 mm removable aluminum or stainless-effect header cover
Ketumpatan teras	Approximately 2700 kg/m³ for the aluminum chassis
Kekonduksian Terma	Approximately 160–205 W/(m·K) for the aluminum enclosure
Kemasan permukaan	Clear anodized, powder-coated or stainless-effect header cover
Jenis Bersatu	Overhead header mounting with push arm, pull arm or slide-channel linkage
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Push-arm or pull-arm linkageTouchless and access-control inputsPresence-sensor interfaceSingle-door or interlocked-airlock programming

Planning a Automatic Swing Door Operator specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami