Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumtüren, Fenster und Interlock-Systeme
Automatischer Swing Door Operator
An overhead electromechanical operator that automates cleanroom swing doors and coordinates activation, safety, access-control and interlock signals.
- Programmable Door Motion
- Access-Control Interface
- Push or Pull Arm Options
- Airlock Sequence Ready
Produkteinführung
The automatic swing door operator combines a geared motor, control board and spring-assisted drive inside a compact aluminum header. Opening angle, hold-open time and travel speed can be programmed for the door leaf, while sensor and access inputs coordinate touchless activation and controlled entry. The operator closes the door through a monitored motion profile and can be integrated with electric locking and interlock logic for cleanroom airlocks.
Key Features
Programmable speed and dwell settings adapt the cycle to personnel flow and contamination-control needs.
Dedicated inputs accept presence sensors, access readers, emergency release and door-position feedback.
Push-arm and pull-arm arrangements support inward- or outward-opening cleanroom layouts.
Kunden Produktbedenken
Automating a sealed swing door requires controlled torque, sensor coordination and reliable return to the closed position.
Users touch handles and contaminate gloves when moving between controlled rooms.The operator accepts touchless, card-reader or remote activation inputs.
A high-resistance seal causes inconsistent opening or incomplete closing.Programmable drive torque and closing profile are matched to the leaf and gasket load.
Two airlock doors must not open together during normal circulation.The controller exchanges lock and door-status signals with the interlock system.
Typische Anwendungen
Hands-free cleanroom entrancesHospital isolation-room doorsInterlocked personnel airlocksAccessible laboratory doors
Technische Parameter
Representative enclosure dimensions and construction for an automatic cleanroom swing-door operator are listed below.
| Core Material | Steel gear train and drive shaft in an extruded aluminum operator chassis |
|---|---|
| Panel Dicke | Approximately 110–120 mm operator depth |
| Effektive Breite | Approximately 100–125 mm header height |
| Maximale Länge | Approximately 610 mm for a single operator module |
| Stahl facing Dicke | 1.5–2.0 mm removable aluminum or stainless-effect header cover |
| Kerndichte | Approximately 2700 kg/m³ for the aluminum chassis |
| Thermische Leitfähigkeit | Approximately 160–205 W/(m·K) for the aluminum enclosure |
| Oberfläche Finish | Clear anodized, powder-coated or stainless-effect header cover |
| Gemeinsamer Typ | Overhead header mounting with push arm, pull arm or slide-channel linkage |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Push-arm or pull-arm linkageTouchless and access-control inputsPresence-sensor interfaceSingle-door or interlocked-airlock programming
Planning a Automatic Swing Door Operator specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
