Automatic swing door operator with arm and control components

クリーンルームのドア、窓およびインターロックシステム

自動スイングドアオペレータ

An overhead electromechanical operator that automates cleanroom swing doors and coordinates activation, safety, access-control and interlock signals.

Programmable Door Motion
Access-Control Interface
Push or Pull Arm Options
Airlock Sequence Ready

見積もりリクエスト製品案内

商品紹介

The automatic swing door operator combines a geared motor, control board and spring-assisted drive inside a compact aluminum header. Opening angle, hold-open time and travel speed can be programmed for the door leaf, while sensor and access inputs coordinate touchless activation and controlled entry. The operator closes the door through a monitored motion profile and can be integrated with electric locking and interlock logic for cleanroom airlocks.

主要な特徴

A geared drive provides repeatable opening torque for sealed doors and pressure-loaded entrances.

Programmable speed and dwell settings adapt the cycle to personnel flow and contamination-control needs.

Dedicated inputs accept presence sensors, access readers, emergency release and door-position feedback.

Push-arm and pull-arm arrangements support inward- or outward-opening cleanroom layouts.

お客様の製品に関する懸念事項

Automating a sealed swing door requires controlled torque, sensor coordination and reliable return to the closed position.

Users touch handles and contaminate gloves when moving between controlled rooms.The operator accepts touchless, card-reader or remote activation inputs.

A high-resistance seal causes inconsistent opening or incomplete closing.Programmable drive torque and closing profile are matched to the leaf and gasket load.

Two airlock doors must not open together during normal circulation.The controller exchanges lock and door-status signals with the interlock system.

典型的な用途

Hands-free cleanroom entrancesHospital isolation-room doorsInterlocked personnel airlocksAccessible laboratory doors

技術的なパラメータ

Representative enclosure dimensions and construction for an automatic cleanroom swing-door operator are listed below.

コア材料	Steel gear train and drive shaft in an extruded aluminum operator chassis
パネルの厚さ	Approximately 110–120 mm operator depth
有効幅	Approximately 100–125 mm header height
最大長さ	Approximately 610 mm for a single operator module
鋼鉄の厚さを直面する	1.5–2.0 mm removable aluminum or stainless-effect header cover
コア密度	Approximately 2700 kg/m³ for the aluminum chassis
熱伝導率	Approximately 160–205 W/(m·K) for the aluminum enclosure
表面仕上げ	Clear anodized, powder-coated or stainless-effect header cover
ジョイントタイプ	Overhead header mounting with push arm, pull arm or slide-channel linkage
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Push-arm or pull-arm linkageTouchless and access-control inputsPresence-sensor interfaceSingle-door or interlocked-airlock programming

Planning a Automatic Swing Door Operator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する