Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Operador automático de puertas swing
An overhead electromechanical operator that automates cleanroom swing doors and coordinates activation, safety, access-control and interlock signals.
- Programmable Door Motion
- Access-Control Interface
- Push or Pull Arm Options
- Airlock Sequence Ready
Introducción del producto
The automatic swing door operator combines a geared motor, control board and spring-assisted drive inside a compact aluminum header. Opening angle, hold-open time and travel speed can be programmed for the door leaf, while sensor and access inputs coordinate touchless activation and controlled entry. The operator closes the door through a monitored motion profile and can be integrated with electric locking and interlock logic for cleanroom airlocks.
Características clave
Programmable speed and dwell settings adapt the cycle to personnel flow and contamination-control needs.
Dedicated inputs accept presence sensors, access readers, emergency release and door-position feedback.
Push-arm and pull-arm arrangements support inward- or outward-opening cleanroom layouts.
Preocupaciones del producto del cliente
Automating a sealed swing door requires controlled torque, sensor coordination and reliable return to the closed position.
Users touch handles and contaminate gloves when moving between controlled rooms.The operator accepts touchless, card-reader or remote activation inputs.
A high-resistance seal causes inconsistent opening or incomplete closing.Programmable drive torque and closing profile are matched to the leaf and gasket load.
Two airlock doors must not open together during normal circulation.The controller exchanges lock and door-status signals with the interlock system.
Aplicaciones típicas
Hands-free cleanroom entrancesHospital isolation-room doorsInterlocked personnel airlocksAccessible laboratory doors
Parámetros técnicos
Representative enclosure dimensions and construction for an automatic cleanroom swing-door operator are listed below.
| Materiales Core | Steel gear train and drive shaft in an extruded aluminum operator chassis |
|---|---|
| Panel de espesor | Approximately 110–120 mm operator depth |
| Ancho efectivo | Approximately 100–125 mm header height |
| Longitud máxima | Approximately 610 mm for a single operator module |
| Acero frente a espesor | 1.5–2.0 mm removable aluminum or stainless-effect header cover |
| Densidad Core | Approximately 2700 kg/m³ for the aluminum chassis |
| Conductividad térmica | Approximately 160–205 W/(m·K) for the aluminum enclosure |
| Superficie acabada | Clear anodized, powder-coated or stainless-effect header cover |
| Tipo conjunto | Overhead header mounting with push arm, pull arm or slide-channel linkage |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Push-arm or pull-arm linkageTouchless and access-control inputsPresence-sensor interfaceSingle-door or interlocked-airlock programming
Planning a Automatic Swing Door Operator specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
