İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri
Otomatik Swing Kapı Operatörü
An overhead electromechanical operator that automates cleanroom swing doors and coordinates activation, safety, access-control and interlock signals.
- Programmable Door Motion
- Access-Control Interface
- Push or Pull Arm Options
- Airlock Sequence Ready
Ürün tanıtımı
The automatic swing door operator combines a geared motor, control board and spring-assisted drive inside a compact aluminum header. Opening angle, hold-open time and travel speed can be programmed for the door leaf, while sensor and access inputs coordinate touchless activation and controlled entry. The operator closes the door through a monitored motion profile and can be integrated with electric locking and interlock logic for cleanroom airlocks.
Ana Özellikler
Programmable speed and dwell settings adapt the cycle to personnel flow and contamination-control needs.
Dedicated inputs accept presence sensors, access readers, emergency release and door-position feedback.
Push-arm and pull-arm arrangements support inward- or outward-opening cleanroom layouts.
Müşteri Ürün Sorunları
Automating a sealed swing door requires controlled torque, sensor coordination and reliable return to the closed position.
Users touch handles and contaminate gloves when moving between controlled rooms.The operator accepts touchless, card-reader or remote activation inputs.
A high-resistance seal causes inconsistent opening or incomplete closing.Programmable drive torque and closing profile are matched to the leaf and gasket load.
Two airlock doors must not open together during normal circulation.The controller exchanges lock and door-status signals with the interlock system.
Tipik uygulamalar
Hands-free cleanroom entrancesHospital isolation-room doorsInterlocked personnel airlocksAccessible laboratory doors
Teknik parametreler
Representative enclosure dimensions and construction for an automatic cleanroom swing-door operator are listed below.
| Temel malzemeler | Steel gear train and drive shaft in an extruded aluminum operator chassis |
|---|---|
| Panel kalınlığı | Approximately 110–120 mm operator depth |
| Effective Width (Etkili Genişlik) | Approximately 100–125 mm header height |
| Maksimum uzunluk | Approximately 610 mm for a single operator module |
| Çelik yüz yüze kalınlığı | 1.5–2.0 mm removable aluminum or stainless-effect header cover |
| Core Density (Çekirdek Yoğunluğu) | Approximately 2700 kg/m³ for the aluminum chassis |
| Termal İletkenlik | Approximately 160–205 W/(m·K) for the aluminum enclosure |
| Yüzey bitirme | Clear anodized, powder-coated or stainless-effect header cover |
| Ortak tip | Overhead header mounting with push arm, pull arm or slide-channel linkage |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Push-arm or pull-arm linkageTouchless and access-control inputsPresence-sensor interfaceSingle-door or interlocked-airlock programming
Planning a Automatic Swing Door Operator specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
