English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
Aالتعبئة عازل
A custom barrier enclosure integrated around filling, stoppering and closure equipment to protect open sterile containers throughout the critical process.
- Filling-Line Integration
- Critical-Zone Unidirectional Air
- Glove-Assisted Intervention
- Closed Component Transfer
مقدمة المنتج
The aseptic filling isolator is designed around the exact fill-finish equipment rather than supplied as an empty cabinet. Chamber sections enclose container infeed, filling, stoppering and critical closure steps, with HEPA-filtered unidirectional air directed over open containers. Glove ports permit planned interventions, while rapid transfer ports, transfer hatches or sterile connectors introduce components. Removable or lift-up lower sections preserve access to the filling machine for controlled maintenance.
الخصائص الرئيسية
Dedicated diffuser zones maintain first air above critical filling and stoppering points.
Glove ports are positioned for defined interventions rather than general access.
Closed transfer interfaces introduce stoppers, tools and components.
Technical-side panels allow machine service without dismantling the complete barrier.
مخاوف المنتج للعملاء
The isolator must fit the filling machine while preserving first air, intervention reach and maintenance access along the complete container path.
Machine frames block clean air above open containers.Diffuser modules are divided around the actual fill and stopper positions.
Glove ports do not reach jam-clearance points.Intervention mapping sets glove locations before chamber fabrication.
Components enter through an open door during production.Rapid ports and sterile transfer interfaces feed closures and tools through closed paths.
Maintenance requires complete barrier removal.Sectioned technical panels and lift-up lower skirts expose the machine in a controlled shutdown.
تطبيقات نموذجية
Vial filling and stopperingPrefilled syringe fillingCartridge fillingSmall-batch sterile fill-finish
المعلمات الفنية
Typical configurable construction ranges for an aseptic filling isolator are listed below.
| المواد الأساسية | Welded SUS316L barrier chamber with laminated safety glass and CSM glove assemblies around filling equipment |
|---|---|
| سمك اللوحة | 50-120 mm chamber, plenum and service sections |
| العرض الفعال | 1800-6000 mm protected line width |
| الحد الأقصى الطول | Up to 20000 mm integrated filling-line length |
| الصلب يواجه سمك | 2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm removable service skins |
| الكثافة الأساسية | Approximately 8000 kg/m³ for SUS316L chamber material |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Electropolished SUS316L interior with flush glazed panels and radiused transitions |
| نوع المشترك | Welded modular barrier sections with sealed machine interfaces, glove rings and rapid transfer ports |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Vial, syringe or cartridge line integrationIntegrated vapor bio-decontaminationRapid transfer and component portsGlove integrity and environmental monitoring connections
Planning a Aseptic Filling Isolator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
