Aseptic filling isolator integrated around a vial filling line

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

무균 충전 격리기

A custom barrier enclosure integrated around filling, stoppering and closure equipment to protect open sterile containers throughout the critical process.

Filling-Line Integration
Critical-Zone Unidirectional Air
Glove-Assisted Intervention
Closed Component Transfer

견적 요청 제품 찾아보기

상품 소개

The aseptic filling isolator is designed around the exact fill-finish equipment rather than supplied as an empty cabinet. Chamber sections enclose container infeed, filling, stoppering and critical closure steps, with HEPA-filtered unidirectional air directed over open containers. Glove ports permit planned interventions, while rapid transfer ports, transfer hatches or sterile connectors introduce components. Removable or lift-up lower sections preserve access to the filling machine for controlled maintenance.

주요 기능

The chamber geometry follows the filling line and open-container path.

Dedicated diffuser zones maintain first air above critical filling and stoppering points.

Glove ports are positioned for defined interventions rather than general access.

Closed transfer interfaces introduce stoppers, tools and components.

Technical-side panels allow machine service without dismantling the complete barrier.

고객 제품 관심사

The isolator must fit the filling machine while preserving first air, intervention reach and maintenance access along the complete container path.

Machine frames block clean air above open containers.Diffuser modules are divided around the actual fill and stopper positions.

Glove ports do not reach jam-clearance points.Intervention mapping sets glove locations before chamber fabrication.

Components enter through an open door during production.Rapid ports and sterile transfer interfaces feed closures and tools through closed paths.

Maintenance requires complete barrier removal.Sectioned technical panels and lift-up lower skirts expose the machine in a controlled shutdown.

일반적인 응용 프로그램

Vial filling and stopperingPrefilled syringe fillingCartridge fillingSmall-batch sterile fill-finish

기술 매개변수

Typical configurable construction ranges for an aseptic filling isolator are listed below.

핵심 재료	Welded SUS316L barrier chamber with laminated safety glass and CSM glove assemblies around filling equipment
패널 두께	50-120 mm chamber, plenum and service sections
유효 폭	1800-6000 mm protected line width
최대 길이	Up to 20000 mm integrated filling-line length
강철 면면 두께	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm removable service skins
코어 밀도	Approximately 8000 kg/m³ for SUS316L chamber material
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished SUS316L interior with flush glazed panels and radiused transitions
접합 유형	Welded modular barrier sections with sealed machine interfaces, glove rings and rapid transfer ports
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Vial, syringe or cartridge line integrationIntegrated vapor bio-decontaminationRapid transfer and component portsGlove integrity and environmental monitoring connections

Planning a Aseptic Filling Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.