Aseptic filling isolator integrated around a vial filling line

Laminar Flow ve Containment Equipment

Aseptik Doldurma İzolatörü

A custom barrier enclosure integrated around filling, stoppering and closure equipment to protect open sterile containers throughout the critical process.

Filling-Line Integration
Critical-Zone Unidirectional Air
Glove-Assisted Intervention
Closed Component Transfer

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The aseptic filling isolator is designed around the exact fill-finish equipment rather than supplied as an empty cabinet. Chamber sections enclose container infeed, filling, stoppering and critical closure steps, with HEPA-filtered unidirectional air directed over open containers. Glove ports permit planned interventions, while rapid transfer ports, transfer hatches or sterile connectors introduce components. Removable or lift-up lower sections preserve access to the filling machine for controlled maintenance.

Ana Özellikler

The chamber geometry follows the filling line and open-container path.

Dedicated diffuser zones maintain first air above critical filling and stoppering points.

Glove ports are positioned for defined interventions rather than general access.

Closed transfer interfaces introduce stoppers, tools and components.

Technical-side panels allow machine service without dismantling the complete barrier.

Müşteri Ürün Sorunları

The isolator must fit the filling machine while preserving first air, intervention reach and maintenance access along the complete container path.

Machine frames block clean air above open containers.Diffuser modules are divided around the actual fill and stopper positions.

Glove ports do not reach jam-clearance points.Intervention mapping sets glove locations before chamber fabrication.

Components enter through an open door during production.Rapid ports and sterile transfer interfaces feed closures and tools through closed paths.

Maintenance requires complete barrier removal.Sectioned technical panels and lift-up lower skirts expose the machine in a controlled shutdown.

Tipik uygulamalar

Vial filling and stopperingPrefilled syringe fillingCartridge fillingSmall-batch sterile fill-finish

Teknik parametreler

Typical configurable construction ranges for an aseptic filling isolator are listed below.

Temel malzemeler	Welded SUS316L barrier chamber with laminated safety glass and CSM glove assemblies around filling equipment
Panel kalınlığı	50-120 mm chamber, plenum and service sections
Effective Width (Etkili Genişlik)	1800-6000 mm protected line width
Maksimum uzunluk	Up to 20000 mm integrated filling-line length
Çelik yüz yüze kalınlığı	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm removable service skins
Core Density (Çekirdek Yoğunluğu)	Approximately 8000 kg/m³ for SUS316L chamber material
Termal İletkenlik	14-16 W/(m·K) for austenitic stainless steel
Yüzey bitirme	Electropolished SUS316L interior with flush glazed panels and radiused transitions
Ortak tip	Welded modular barrier sections with sealed machine interfaces, glove rings and rapid transfer ports
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Vial, syringe or cartridge line integrationIntegrated vapor bio-decontaminationRapid transfer and component portsGlove integrity and environmental monitoring connections

Planning a Aseptic Filling Isolator specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun