Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Laminar Flow und Containment Equipment
Aseptischer Filling Isolator
A custom barrier enclosure integrated around filling, stoppering and closure equipment to protect open sterile containers throughout the critical process.
- Filling-Line Integration
- Critical-Zone Unidirectional Air
- Glove-Assisted Intervention
- Closed Component Transfer
Produkteinführung
The aseptic filling isolator is designed around the exact fill-finish equipment rather than supplied as an empty cabinet. Chamber sections enclose container infeed, filling, stoppering and critical closure steps, with HEPA-filtered unidirectional air directed over open containers. Glove ports permit planned interventions, while rapid transfer ports, transfer hatches or sterile connectors introduce components. Removable or lift-up lower sections preserve access to the filling machine for controlled maintenance.
Key Features
Dedicated diffuser zones maintain first air above critical filling and stoppering points.
Glove ports are positioned for defined interventions rather than general access.
Closed transfer interfaces introduce stoppers, tools and components.
Technical-side panels allow machine service without dismantling the complete barrier.
Kunden Produktbedenken
The isolator must fit the filling machine while preserving first air, intervention reach and maintenance access along the complete container path.
Machine frames block clean air above open containers.Diffuser modules are divided around the actual fill and stopper positions.
Glove ports do not reach jam-clearance points.Intervention mapping sets glove locations before chamber fabrication.
Components enter through an open door during production.Rapid ports and sterile transfer interfaces feed closures and tools through closed paths.
Maintenance requires complete barrier removal.Sectioned technical panels and lift-up lower skirts expose the machine in a controlled shutdown.
Typische Anwendungen
Vial filling and stopperingPrefilled syringe fillingCartridge fillingSmall-batch sterile fill-finish
Technische Parameter
Typical configurable construction ranges for an aseptic filling isolator are listed below.
| Core Material | Welded SUS316L barrier chamber with laminated safety glass and CSM glove assemblies around filling equipment |
|---|---|
| Panel Dicke | 50-120 mm chamber, plenum and service sections |
| Effektive Breite | 1800-6000 mm protected line width |
| Maximale Länge | Up to 20000 mm integrated filling-line length |
| Stahl facing Dicke | 2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm removable service skins |
| Kerndichte | Approximately 8000 kg/m³ for SUS316L chamber material |
| Thermische Leitfähigkeit | 14 - 16 W / (m · K) für austenitischen Edelstahl |
| Oberfläche Finish | Electropolished SUS316L interior with flush glazed panels and radiused transitions |
| Gemeinsamer Typ | Welded modular barrier sections with sealed machine interfaces, glove rings and rapid transfer ports |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Vial, syringe or cartridge line integrationIntegrated vapor bio-decontaminationRapid transfer and component portsGlove integrity and environmental monitoring connections
Planning a Aseptic Filling Isolator specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
