Aseptic filling isolator integrated around a vial filling line

Оборудование для ламинарного потока и ограничения

Асептический изолятор наполнения

A custom barrier enclosure integrated around filling, stoppering and closure equipment to protect open sterile containers throughout the critical process.

Filling-Line Integration
Critical-Zone Unidirectional Air
Glove-Assisted Intervention
Closed Component Transfer

Запрос котировки Просмотреть продукты

Введение продукции

The aseptic filling isolator is designed around the exact fill-finish equipment rather than supplied as an empty cabinet. Chamber sections enclose container infeed, filling, stoppering and critical closure steps, with HEPA-filtered unidirectional air directed over open containers. Glove ports permit planned interventions, while rapid transfer ports, transfer hatches or sterile connectors introduce components. Removable or lift-up lower sections preserve access to the filling machine for controlled maintenance.

Основные характеристики

The chamber geometry follows the filling line and open-container path.

Dedicated diffuser zones maintain first air above critical filling and stoppering points.

Glove ports are positioned for defined interventions rather than general access.

Closed transfer interfaces introduce stoppers, tools and components.

Technical-side panels allow machine service without dismantling the complete barrier.

Обеспокоенность клиентов продуктами

The isolator must fit the filling machine while preserving first air, intervention reach and maintenance access along the complete container path.

Machine frames block clean air above open containers.Diffuser modules are divided around the actual fill and stopper positions.

Glove ports do not reach jam-clearance points.Intervention mapping sets glove locations before chamber fabrication.

Components enter through an open door during production.Rapid ports and sterile transfer interfaces feed closures and tools through closed paths.

Maintenance requires complete barrier removal.Sectioned technical panels and lift-up lower skirts expose the machine in a controlled shutdown.

Типичные приложения

Vial filling and stopperingPrefilled syringe fillingCartridge fillingSmall-batch sterile fill-finish

Технические параметры

Typical configurable construction ranges for an aseptic filling isolator are listed below.

Основной материал	Welded SUS316L barrier chamber with laminated safety glass and CSM glove assemblies around filling equipment
Толщина панели	50-120 mm chamber, plenum and service sections
эффективная ширина	1800-6000 mm protected line width
Максимальная длина	Up to 20000 mm integrated filling-line length
Толщина линий стали	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm removable service skins
Плотность ядра	Approximately 8000 kg/m³ for SUS316L chamber material
Теплопроводимость	14-16 W/(m·K) for austenitic stainless steel
Поверхностная отделка	Electropolished SUS316L interior with flush glazed panels and radiused transitions
Объединенный тип	Welded modular barrier sections with sealed machine interfaces, glove rings and rapid transfer ports
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Vial, syringe or cartridge line integrationIntegrated vapor bio-decontaminationRapid transfer and component portsGlove integrity and environmental monitoring connections

Planning a Aseptic Filling Isolator specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой