Cleanroom emergency LED light with sealed white body and twin optical heads

Temiz Oda Aydınlatma ve Elektrik Ekipmanları

Temiz Oda Acil Işığı

A sealed emergency luminaire that keeps its battery, charger and test circuitry behind a cleanable room-side enclosure.

Integrated Backup Battery
Visible Charge Indicator
Sealed Test Control
Automatic Power-Failure Operation

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The emergency light combines efficient LED optics with an internal or remote rechargeable battery and automatic transfer electronics. In normal operation the charger maintains the battery; when the monitored supply fails, the emergency driver powers the dedicated LED section. A small sealed indicator and test point remain visible from the room without adding an open switch aperture.

Ana Özellikler

A dedicated emergency driver transfers automatically when the normal lighting circuit is lost.

The charge-status indicator is sealed behind a clear window or membrane.

A recessed test button avoids a projecting dirt-catching control.

The battery compartment is separated from the room-facing optical chamber.

Wide-distribution optics spread useful egress light along the floor path.

Müşteri Ürün Sorunları

Emergency lighting must remain testable and visible while maintaining the smooth sealed surfaces expected inside a cleanroom.

An open test switch creates a recess that traps disinfectant.A sealed membrane or recessed protected button keeps the control wipeable.

Battery heat and service access disturb the lens cavity.A separate battery compartment isolates electrical maintenance from the optic.

A narrow beam leaves the floor route unevenly lit.Wide-distribution LED optics direct emergency output across the egress path.

Staff cannot tell whether the charger is active.A distinct low-intensity status indicator confirms normal charging condition.

Tipik uygulamalar

Cleanroom escape routesAseptic room doorwaysControlled-area airlocksCritical utility passages

Teknik parametreler

Typical configurable construction ranges for a cleanroom emergency LED light are listed below.

Temel malzemeler	Powder-coated steel or polymer enclosure with LED optics, rechargeable battery, charger and transfer driver
Panel kalınlığı	70-150 mm enclosure depth
Effective Width (Etkili Genişlik)	180-450 mm exposed luminaire width
Maksimum uzunluk	Up to 700 mm complete unit length
Çelik yüz yüze kalınlığı	0.8-1.2 mm formed steel housing when a metal enclosure is selected
Core Density (Çekirdek Yoğunluğu)	Approximately 1200-1450 kg/m³ for flame-retardant polymer housing components
Termal İletkenlik	0.20-0.35 W/(m·K) for the engineering-polymer enclosure
Yüzey bitirme	Smooth white low-gloss exterior with clear status window and opal optical lens
Ortak tip	Gasketed housing seam with sealed test membrane, retained optical cover and protected battery compartment
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Integral or remote battery packMaintained or non-maintained operationManual or self-test controlCeiling or wall mounting

Planning a Cleanroom Emergency Light specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun