Cleanroom emergency LED light with sealed white body and twin optical heads

클린룸 조명 및 전기 장비

클린룸 비상 조명

A sealed emergency luminaire that keeps its battery, charger and test circuitry behind a cleanable room-side enclosure.

Integrated Backup Battery
Visible Charge Indicator
Sealed Test Control
Automatic Power-Failure Operation

견적 요청 제품 찾아보기

상품 소개

The emergency light combines efficient LED optics with an internal or remote rechargeable battery and automatic transfer electronics. In normal operation the charger maintains the battery; when the monitored supply fails, the emergency driver powers the dedicated LED section. A small sealed indicator and test point remain visible from the room without adding an open switch aperture.

주요 기능

A dedicated emergency driver transfers automatically when the normal lighting circuit is lost.

The charge-status indicator is sealed behind a clear window or membrane.

A recessed test button avoids a projecting dirt-catching control.

The battery compartment is separated from the room-facing optical chamber.

Wide-distribution optics spread useful egress light along the floor path.

고객 제품 관심사

Emergency lighting must remain testable and visible while maintaining the smooth sealed surfaces expected inside a cleanroom.

An open test switch creates a recess that traps disinfectant.A sealed membrane or recessed protected button keeps the control wipeable.

Battery heat and service access disturb the lens cavity.A separate battery compartment isolates electrical maintenance from the optic.

A narrow beam leaves the floor route unevenly lit.Wide-distribution LED optics direct emergency output across the egress path.

Staff cannot tell whether the charger is active.A distinct low-intensity status indicator confirms normal charging condition.

일반적인 응용 프로그램

Cleanroom escape routesAseptic room doorwaysControlled-area airlocksCritical utility passages

기술 매개변수

Typical configurable construction ranges for a cleanroom emergency LED light are listed below.

핵심 재료	Powder-coated steel or polymer enclosure with LED optics, rechargeable battery, charger and transfer driver
패널 두께	70-150 mm enclosure depth
유효 폭	180-450 mm exposed luminaire width
최대 길이	Up to 700 mm complete unit length
강철 면면 두께	0.8-1.2 mm formed steel housing when a metal enclosure is selected
코어 밀도	Approximately 1200-1450 kg/m³ for flame-retardant polymer housing components
열전도도 (Thermal Conductivity)	0.20-0.35 W/(m·K) for the engineering-polymer enclosure
표면 마무리	Smooth white low-gloss exterior with clear status window and opal optical lens
접합 유형	Gasketed housing seam with sealed test membrane, retained optical cover and protected battery compartment
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Integral or remote battery packMaintained or non-maintained operationManual or self-test controlCeiling or wall mounting

Planning a Cleanroom Emergency Light specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.