English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Освещение и электрическое оборудование в чистых помещениях
Чистое аварийное освещение
A sealed emergency luminaire that keeps its battery, charger and test circuitry behind a cleanable room-side enclosure.
- Integrated Backup Battery
- Visible Charge Indicator
- Sealed Test Control
- Automatic Power-Failure Operation
Введение продукции
The emergency light combines efficient LED optics with an internal or remote rechargeable battery and automatic transfer electronics. In normal operation the charger maintains the battery; when the monitored supply fails, the emergency driver powers the dedicated LED section. A small sealed indicator and test point remain visible from the room without adding an open switch aperture.
Основные характеристики
The charge-status indicator is sealed behind a clear window or membrane.
A recessed test button avoids a projecting dirt-catching control.
The battery compartment is separated from the room-facing optical chamber.
Wide-distribution optics spread useful egress light along the floor path.
Обеспокоенность клиентов продуктами
Emergency lighting must remain testable and visible while maintaining the smooth sealed surfaces expected inside a cleanroom.
An open test switch creates a recess that traps disinfectant.A sealed membrane or recessed protected button keeps the control wipeable.
Battery heat and service access disturb the lens cavity.A separate battery compartment isolates electrical maintenance from the optic.
A narrow beam leaves the floor route unevenly lit.Wide-distribution LED optics direct emergency output across the egress path.
Staff cannot tell whether the charger is active.A distinct low-intensity status indicator confirms normal charging condition.
Типичные приложения
Cleanroom escape routesAseptic room doorwaysControlled-area airlocksCritical utility passages
Технические параметры
Typical configurable construction ranges for a cleanroom emergency LED light are listed below.
| Основной материал | Powder-coated steel or polymer enclosure with LED optics, rechargeable battery, charger and transfer driver |
|---|---|
| Толщина панели | 70-150 mm enclosure depth |
| эффективная ширина | 180-450 mm exposed luminaire width |
| Максимальная длина | Up to 700 mm complete unit length |
| Толщина линий стали | 0.8-1.2 mm formed steel housing when a metal enclosure is selected |
| Плотность ядра | Approximately 1200-1450 kg/m³ for flame-retardant polymer housing components |
| Теплопроводимость | 0.20-0.35 W/(m·K) for the engineering-polymer enclosure |
| Поверхностная отделка | Smooth white low-gloss exterior with clear status window and opal optical lens |
| Объединенный тип | Gasketed housing seam with sealed test membrane, retained optical cover and protected battery compartment |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Integral or remote battery packMaintained or non-maintained operationManual or self-test controlCeiling or wall mounting
Planning a Cleanroom Emergency Light specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
