Cleanroom emergency LED light with sealed white body and twin optical heads

クリーンルーム照明 · 電気機器

クリーンルーム緊急ライト

A sealed emergency luminaire that keeps its battery, charger and test circuitry behind a cleanable room-side enclosure.

Integrated Backup Battery
Visible Charge Indicator
Sealed Test Control
Automatic Power-Failure Operation

商品紹介

The emergency light combines efficient LED optics with an internal or remote rechargeable battery and automatic transfer electronics. In normal operation the charger maintains the battery; when the monitored supply fails, the emergency driver powers the dedicated LED section. A small sealed indicator and test point remain visible from the room without adding an open switch aperture.

主要な特徴

A dedicated emergency driver transfers automatically when the normal lighting circuit is lost.

The charge-status indicator is sealed behind a clear window or membrane.

A recessed test button avoids a projecting dirt-catching control.

The battery compartment is separated from the room-facing optical chamber.

Wide-distribution optics spread useful egress light along the floor path.

お客様の製品に関する懸念事項

Emergency lighting must remain testable and visible while maintaining the smooth sealed surfaces expected inside a cleanroom.

An open test switch creates a recess that traps disinfectant.A sealed membrane or recessed protected button keeps the control wipeable.

Battery heat and service access disturb the lens cavity.A separate battery compartment isolates electrical maintenance from the optic.

A narrow beam leaves the floor route unevenly lit.Wide-distribution LED optics direct emergency output across the egress path.

Staff cannot tell whether the charger is active.A distinct low-intensity status indicator confirms normal charging condition.

典型的な用途

Cleanroom escape routesAseptic room doorwaysControlled-area airlocksCritical utility passages

技術的なパラメータ

Typical configurable construction ranges for a cleanroom emergency LED light are listed below.

コア材料	Powder-coated steel or polymer enclosure with LED optics, rechargeable battery, charger and transfer driver
パネルの厚さ	70-150 mm enclosure depth
有効幅	180-450 mm exposed luminaire width
最大長さ	Up to 700 mm complete unit length
鋼鉄の厚さを直面する	0.8-1.2 mm formed steel housing when a metal enclosure is selected
コア密度	Approximately 1200-1450 kg/m³ for flame-retardant polymer housing components
熱伝導率	0.20-0.35 W/(m·K) for the engineering-polymer enclosure
表面仕上げ	Smooth white low-gloss exterior with clear status window and opal optical lens
ジョイントタイプ	Gasketed housing seam with sealed test membrane, retained optical cover and protected battery compartment
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Integral or remote battery packMaintained or non-maintained operationManual or self-test controlCeiling or wall mounting

Planning a Cleanroom Emergency Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する