Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Luz de emergencia de sala limpia
A sealed emergency luminaire that keeps its battery, charger and test circuitry behind a cleanable room-side enclosure.
- Integrated Backup Battery
- Visible Charge Indicator
- Sealed Test Control
- Automatic Power-Failure Operation
Introducción del producto
The emergency light combines efficient LED optics with an internal or remote rechargeable battery and automatic transfer electronics. In normal operation the charger maintains the battery; when the monitored supply fails, the emergency driver powers the dedicated LED section. A small sealed indicator and test point remain visible from the room without adding an open switch aperture.
Características clave
The charge-status indicator is sealed behind a clear window or membrane.
A recessed test button avoids a projecting dirt-catching control.
The battery compartment is separated from the room-facing optical chamber.
Wide-distribution optics spread useful egress light along the floor path.
Preocupaciones del producto del cliente
Emergency lighting must remain testable and visible while maintaining the smooth sealed surfaces expected inside a cleanroom.
An open test switch creates a recess that traps disinfectant.A sealed membrane or recessed protected button keeps the control wipeable.
Battery heat and service access disturb the lens cavity.A separate battery compartment isolates electrical maintenance from the optic.
A narrow beam leaves the floor route unevenly lit.Wide-distribution LED optics direct emergency output across the egress path.
Staff cannot tell whether the charger is active.A distinct low-intensity status indicator confirms normal charging condition.
Aplicaciones típicas
Cleanroom escape routesAseptic room doorwaysControlled-area airlocksCritical utility passages
Parámetros técnicos
Typical configurable construction ranges for a cleanroom emergency LED light are listed below.
| Materiales Core | Powder-coated steel or polymer enclosure with LED optics, rechargeable battery, charger and transfer driver |
|---|---|
| Panel de espesor | 70-150 mm enclosure depth |
| Ancho efectivo | 180-450 mm exposed luminaire width |
| Longitud máxima | Up to 700 mm complete unit length |
| Acero frente a espesor | 0.8-1.2 mm formed steel housing when a metal enclosure is selected |
| Densidad Core | Approximately 1200-1450 kg/m³ for flame-retardant polymer housing components |
| Conductividad térmica | 0.20-0.35 W/(m·K) for the engineering-polymer enclosure |
| Superficie acabada | Smooth white low-gloss exterior with clear status window and opal optical lens |
| Tipo conjunto | Gasketed housing seam with sealed test membrane, retained optical cover and protected battery compartment |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Integral or remote battery packMaintained or non-maintained operationManual or self-test controlCeiling or wall mounting
Planning a Cleanroom Emergency Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
