ผู้จัดจําหน่ายแบบครบวงจรสําหรับอุปกรณ์ห้องคลีนรูมและสิ่งจําเป็นสําหรับสิ่งอํานวยความสะดวกปลอดเชื้อการสนับสนุนโครงการระหว่างประเทศ
Open mobile navigationClose mobile navigation
แสงสว่างห้องสะอาดและอุปกรณ์ไฟฟ้า

Cleanroom ไฟฉุกเฉิน

A sealed emergency luminaire that keeps its battery, charger and test circuitry behind a cleanable room-side enclosure.
  • Integrated Backup Battery
  • Visible Charge Indicator
  • Sealed Test Control
  • Automatic Power-Failure Operation
ขอใบเสนอราคา เรียกดูสินค้า

การแนะนําสินค้า

The emergency light combines efficient LED optics with an internal or remote rechargeable battery and automatic transfer electronics. In normal operation the charger maintains the battery; when the monitored supply fails, the emergency driver powers the dedicated LED section. A small sealed indicator and test point remain visible from the room without adding an open switch aperture.

คุณสมบัติที่สําคัญ

A dedicated emergency driver transfers automatically when the normal lighting circuit is lost.

The charge-status indicator is sealed behind a clear window or membrane.

A recessed test button avoids a projecting dirt-catching control.

The battery compartment is separated from the room-facing optical chamber.

Wide-distribution optics spread useful egress light along the floor path.

ความกังวลของลูกค้าเกี่ยวกับผลิตภัณฑ์

Emergency lighting must remain testable and visible while maintaining the smooth sealed surfaces expected inside a cleanroom.

An open test switch creates a recess that traps disinfectant.A sealed membrane or recessed protected button keeps the control wipeable.
Battery heat and service access disturb the lens cavity.A separate battery compartment isolates electrical maintenance from the optic.
A narrow beam leaves the floor route unevenly lit.Wide-distribution LED optics direct emergency output across the egress path.
Staff cannot tell whether the charger is active.A distinct low-intensity status indicator confirms normal charging condition.

การใช้งานทั่วไป

Cleanroom escape routesAseptic room doorwaysControlled-area airlocksCritical utility passages

พารามิเตอร์ทางเทคนิค

Typical configurable construction ranges for a cleanroom emergency LED light are listed below.

วัสดุหลักPowder-coated steel or polymer enclosure with LED optics, rechargeable battery, charger and transfer driver
ความหนาของแผง70-150 mm enclosure depth
ความกว้างที่มีประสิทธิภาพ180-450 mm exposed luminaire width
ความยาวสูงสุดUp to 700 mm complete unit length
ความหนาของเหล็กหันหน้า0.8-1.2 mm formed steel housing when a metal enclosure is selected
ความหนาแน่นหลักApproximately 1200-1450 kg/m³ for flame-retardant polymer housing components
การนําความร้อน0.20-0.35 W/(m·K) for the engineering-polymer enclosure
เสร็จสิ้นพื้นผิวSmooth white low-gloss exterior with clear status window and opal optical lens
ประเภทร่วมGasketed housing seam with sealed test membrane, retained optical cover and protected battery compartment
การปรับแต่งสามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน

ตัวเลือกที่มีอยู่

Integral or remote battery packMaintained or non-maintained operationManual or self-test controlCeiling or wall mounting

Planning a Cleanroom Emergency Light specification?

ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

พูดคุยกับทีมงานของเรา
อีเมลถึงเรา WhatsApp WeChat

หน้าแรก

ผลิตภัณฑ์

ข่าวสาร

เกี่ยวกับเรา

ติดต่อเรา