İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Alüminyum hava borusu
A lightweight aluminum sheet duct for clean, non-abrasive air systems where corrosion resistance and reduced suspended load are important.
- Low Structural Weight
- Natural Corrosion Resistance
- Clean Smooth Interior
- Rectangular or Round Format
Ürün tanıtımı
Aluminum ductwork reduces the dead load carried by cleanroom ceiling supports while providing a naturally corrosion-resistant surface for conditioned air. Sections are fabricated from 3003 or 5052 aluminum sheet using lock-formed or welded seams and aluminum flange components. Because aluminum is softer than steel, panel reinforcement and support spacing are selected to prevent distortion during transport and operation. The non-sparking, non-ferrous construction is useful in selected technical areas, provided the conveyed chemicals and galvanic interfaces are compatible with the chosen alloy.
Ana Özellikler
A stable aluminum oxide layer protects the surface in normal indoor clean-air service.
Non-ferrous construction avoids rust staining from exposed cut edges.
Formed stiffeners and closer hanger spacing control deformation in broad rectangular panels.
Müşteri Ürün Sorunları
Lightweight aluminum duct must be detailed around its lower stiffness, dissimilar-metal contacts and the actual chemical exposure of the air stream.
A steel duct route places excessive load on a long-span cleanroom ceiling.Aluminum sheet lowers duct mass while maintaining the scheduled internal dimensions.
Soft panels dent during lifting and field assembly.Protective packaging, reinforced faces and controlled lifting points maintain the duct geometry.
Direct contact with steel hangers causes galvanic staining in humid areas.Non-conductive isolation pads and compatible fasteners separate dissimilar metals.
A selected cleaning agent dulls or pits the aluminum finish.Alloy and surface treatment are matched to the documented chemical and cleaning exposure.
Tipik uygulamalar
Cleanroom supply-air branchesLightweight ceiling duct routesHumidity-controlled production roomsMarine or coastal technical areasNon-ferrous ventilation assemblies
Teknik parametreler
Common construction ranges for fabricated aluminum air duct are summarized below.
| Temel malzemeler | 3003-H14 or 5052-H32 aluminum alloy sheet |
|---|---|
| Panel kalınlığı | 0.8–1.8 mm, selected by duct dimension and pressure duty |
| Effective Width (Etkili Genişlik) | 150–1600 mm rectangular side dimension |
| Maksimum uzunluk | 1200–1500 mm per fabricated section |
| Çelik yüz yüze kalınlığı | 0.8–1.8 mm aluminum wall in place of steel facing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 2700 kg/m³ solid aluminum construction |
| Termal İletkenlik | Approximately 138–170 W/(m·K), depending on aluminum alloy |
| Yüzey bitirme | Mill finish, clear anodized or powder-coated aluminum |
| Ortak tip | Aluminum flange or slip joint with compatible gasket and isolated fasteners |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
3003 or 5052 alloyClear anodized or powder-coated finishRectangular, round and transition sectionsInternal acoustic or external thermal insulation
Planning a Aluminum Air Duct specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
