Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Luftverteilungssysteme
Aluminium Air Duct
A lightweight aluminum sheet duct for clean, non-abrasive air systems where corrosion resistance and reduced suspended load are important.
- Low Structural Weight
- Natural Corrosion Resistance
- Clean Smooth Interior
- Rectangular or Round Format
Produkteinführung
Aluminum ductwork reduces the dead load carried by cleanroom ceiling supports while providing a naturally corrosion-resistant surface for conditioned air. Sections are fabricated from 3003 or 5052 aluminum sheet using lock-formed or welded seams and aluminum flange components. Because aluminum is softer than steel, panel reinforcement and support spacing are selected to prevent distortion during transport and operation. The non-sparking, non-ferrous construction is useful in selected technical areas, provided the conveyed chemicals and galvanic interfaces are compatible with the chosen alloy.
Key Features
A stable aluminum oxide layer protects the surface in normal indoor clean-air service.
Non-ferrous construction avoids rust staining from exposed cut edges.
Formed stiffeners and closer hanger spacing control deformation in broad rectangular panels.
Kunden Produktbedenken
Lightweight aluminum duct must be detailed around its lower stiffness, dissimilar-metal contacts and the actual chemical exposure of the air stream.
A steel duct route places excessive load on a long-span cleanroom ceiling.Aluminum sheet lowers duct mass while maintaining the scheduled internal dimensions.
Soft panels dent during lifting and field assembly.Protective packaging, reinforced faces and controlled lifting points maintain the duct geometry.
Direct contact with steel hangers causes galvanic staining in humid areas.Non-conductive isolation pads and compatible fasteners separate dissimilar metals.
A selected cleaning agent dulls or pits the aluminum finish.Alloy and surface treatment are matched to the documented chemical and cleaning exposure.
Typische Anwendungen
Cleanroom supply-air branchesLightweight ceiling duct routesHumidity-controlled production roomsMarine or coastal technical areasNon-ferrous ventilation assemblies
Technische Parameter
Common construction ranges for fabricated aluminum air duct are summarized below.
| Core Material | 3003-H14 or 5052-H32 aluminum alloy sheet |
|---|---|
| Panel Dicke | 0.8–1.8 mm, selected by duct dimension and pressure duty |
| Effektive Breite | 150–1600 mm rectangular side dimension |
| Maximale Länge | 1200–1500 mm per fabricated section |
| Stahl facing Dicke | 0.8–1.8 mm aluminum wall in place of steel facing |
| Kerndichte | Approximately 2700 kg/m³ solid aluminum construction |
| Thermische Leitfähigkeit | Approximately 138–170 W/(m·K), depending on aluminum alloy |
| Oberfläche Finish | Mill finish, clear anodized or powder-coated aluminum |
| Gemeinsamer Typ | Aluminum flange or slip joint with compatible gasket and isolated fasteners |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
3003 or 5052 alloyClear anodized or powder-coated finishRectangular, round and transition sectionsInternal acoustic or external thermal insulation
Planning a Aluminum Air Duct specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
