Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Unidad de manejo de aire de sala limpia por
A low-leakage hygienic air handler designed to filter, cool, heat and condition supply air for pressure-controlled clean production spaces.
- Smooth Hygienic Interior
- Filtración multietapa
- Controlled Supply Air
- Condensation-Resistant Casing
Introducción del producto
A cleanroom air handling unit conditions the large, stable airflow needed to control temperature, humidity, pressure cascade and particle transport. The casing uses flush cleanable inner panels, sealed access doors, drainable coil sections and corrosion-resistant hardware. Prefilters protect the coil and downstream final filters, while direct-drive fans modulate against filter loading and room-pressure demand. Coil face velocity, condensate drainage and access clearances are selected to prevent water carryover into downstream sections.
Características clave
Separated prefilter and fine-filter stages protect coils and extend the useful life of downstream final filters.
Sloped stainless-steel drain pans remove condensate from cooling-coil sections without standing water.
Variable-speed direct-drive fans maintain scheduled airflow as filters load and operating modes change.
Preocupaciones del producto del cliente
Particle control depends on the entire supply-air path remaining clean, dry and pressure-stable through changing filter and thermal loads.
Dust accumulates on internal ledges that are difficult to reach during sanitation.Flush inner panels and removable components leave broad surfaces accessible for wipe-down.
Cooling-coil condensate remains in the unit and supports odor or microbial growth.A sloped stainless drain pan and correctly trapped drain evacuate water from the wet section.
Rising filter resistance reduces room air changes and destabilizes pressure.Fan-speed control responds to airflow or static-pressure feedback across the operating filter range.
Air bypasses the final filter because the holding frame is not uniformly sealed.Gasketed filter tracks apply even compression around each selected filter module.
Aplicaciones típicas
Sterile pharmaceutical manufacturingBiological laboratoriesDispositivos médicos Asamblea limpiaSemiconductor support cleanroomsHospital clean treatment areas
Parámetros técnicos
The following ranges describe a typical hygienic double-skin AHU for cleanroom service.
| Materiales Core | Closed-cell polyurethane or non-shedding mineral-wool casing insulation |
|---|---|
| Panel de espesor | 50–60 mm double-skin hygienic panel |
| Ancho efectivo | 900–3600 mm nominal unit width |
| Longitud máxima | Up to 11000 mm with gasketed modular sections |
| Acero frente a espesor | 0.6–1.0 mm outer skin and 0.8–1.0 mm cleanable inner skin |
| Densidad Core | 40–44 kg/m³ polyurethane or 82–100 kg/m³ mineral wool |
| Conductividad térmica | 0.022–0.038 W/(m·K) for the insulated casing core |
| Superficie acabada | Powder-coated exterior with smooth galvanized, coated or 304 stainless-steel interior |
| Tipo conjunto | Flush gasketed panels on thermal-break frame with sealed filter and access-door interfaces |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316L stainless-steel wet-section liningEC fan wall with airflow measurementHeating, cooling and reheat coil combinationsPrefilter, fine-filter and HEPA housing stages
Planning a Cleanroom Air Handling Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
