Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Hollow MgO Cleanroom Panel Sandwich
A cleanroom sandwich panel built around a profiled hollow magnesium oxide core, reducing solid material mass while retaining firm inorganic webs that support flat steel facings and convenient internal service routing.
- Profiled Hollow MgO Core
- Integrated Service Cavities
- Firm Inorganic Webs
- Protected Four-Side Frame
Introducción del producto
Hollow MgO Cleanroom Panels use molded magnesium oxide profiles rather than a fully solid core. Internal ribs support the outer metal skins, while continuous cavities reduce weight and can accommodate carefully routed low-voltage services. The hard inorganic webs create useful bearing zones around the panel perimeter and at prepared openings. Steel facings close the core from the controlled room, and framed edges protect the hollow geometry during cutting and installation. This construction is particularly useful for ceiling modules and service-integrated partitions.
Características clave
Internal MgO ribs transfer surface pressure between the two metal faces.
Selected cavities can carry pre-planned conduits without exposing services in the clean area.
Four-sided framing closes the hollow ends and protects the core profile.
Factory-prepared openings preserve rib continuity around lights, outlets and inspection points.
Preocupaciones del producto del cliente
The main concerns are unsupported cut-outs, concealed-service access, edge damage and local point loading.
Random site cutting can sever internal ribs and weaken the panel around an opening.Factory-planned cut-outs retain supporting webs and add perimeter reinforcement where needed.
Loose cables inside an inaccessible cavity are difficult to inspect later.Defined conduit routes and labeled access points keep concealed services orderly and traceable.
Open hollow ends can trap debris or expose the internal structure.Closed edge frames seal every perimeter and provide clean interfaces to adjacent modules.
Concentrated ceiling loads can fall between the core ribs.Local inserts transfer fixtures to reinforced zones instead of relying on an unsupported cavity.
Aplicaciones típicas
Service-integrated cleanroom partitionsLighting and utility ceiling modulesLaboratory wall systemsElectronics manufacturing roomsMedical clean corridors
Parámetros técnicos
The common manufacturing range for hollow MgO cleanroom panels is listed below.
| Materiales Core | Profiled hollow magnesium oxide composite |
|---|---|
| Panel de espesor | 50, 75, 100 or 150 mm |
| Ancho efectivo | 950, 980 or 1150 mm |
| Longitud máxima | 6000 mm |
| Acero frente a espesor | 0.40–0.80 mm |
| Densidad Core | 900–1200 kg/m³ for the MgO rib material |
| Conductividad térmica | 0.070–0.090 W/(m·K) for the hollow core assembly |
| Superficie acabada | PE-, HDP- or PVDF-coated galvanized steel |
| Tipo conjunto | Four-sided framed tongue-and-groove or center-aluminum joint |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Internal conduit routingCeiling fixture reinforcementAlternative hollow rib layoutPre-cut electrical and lighting openings
Planning a Hollow MgO Cleanroom Sandwich Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
