Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Sistema de drenagem de vácuo
Packaged vacuum drainage assembly using a receiver, controls and vacuum-compatible piping to move waste where gravity fall is limited.
- Sealed Stainless Receiver
- Duty-Standby Vacuum Pumps
- Integrated Level and Alarm Control
- Compact Serviceable Skid
Introdução do produto
The vacuum drainage system combines a sealed stainless receiver, vacuum generation equipment, discharge valves and controls on a coordinated skid. Collection branches operate below atmospheric pressure so waste can be moved from locations where continuous gravity fall is impractical. Level instruments sequence filling and discharge, while local alarms and optional building-management contacts report abnormal vacuum or receiver conditions.
Características-chave
Duty-standby pump configurations support operational continuity and maintenance.
Level switches and pressure monitoring coordinate collection, discharge and alarm states.
Grouped valves, pumps and controls keep routine service access on the packaged skid.
Preocupações do produto do cliente
Some controlled facilities cannot maintain gravity fall from every collection point and need reliable transport without frequent intervention inside clean rooms.
Flat or congested service routes cannot provide continuous gravity slope.A controlled vacuum network transports collected waste through smaller routed pipework.
Loss of vacuum can interrupt several connected collection points.Pressure monitoring and alarm contacts identify abnormal vacuum conditions for prompt response.
Receiver overflow can contaminate pumps or surrounding service areas.Multiple level points sequence discharge and provide independent high-level alarming.
Maintenance inside clean areas disrupts operations and contamination control.Vacuum generation, receiver, valves and controls are grouped on an accessible utility-side skid.
Aplicações típicas
Retrofit Cleanroom (em inglês)Below-grade collection pointsUtility-constrained process suitesDistributed equipment waste collection
Parâmetros técnicos
Typical packaged-skid construction ranges are shown below; receiver volume, pump duty, controls and wetted materials are selected for the connected load and waste stream.
| Material principal | AISI 304 or 316L stainless steel wetted receiver and piping |
|---|---|
| Painel de espessura | 2.0-4.0 mm receiver and skid-mounted vessel wall |
| Largura efetiva | 600-1500 mm packaged skid width |
| Comprimento máximo | Up to 2500 mm packaged skid length |
| Aço enfrentando espessura | 1.5-2.0 mm control enclosure skin |
| Densidade Core | 7900-8000 kg/m³ for stainless wetted parts |
| Condutividade térmica | 14-16 W/(m·K) for stainless wetted parts |
| Superfície acabado | Passivated stainless wetted surfaces with powder-coated or stainless support frame |
| Tipo conjunto | Vacuum-rated push-fit, hygienic clamp or welded process connections |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Receiver volume selectionSingle or duty-standby pumps304 or 316L wetted partsRemote alarm and BMS interface
Planning a Vacuum Drainage System specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
