English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
نظام الصرف الصحي فراغ
Packaged vacuum drainage assembly using a receiver, controls and vacuum-compatible piping to move waste where gravity fall is limited.
- Sealed Stainless Receiver
- Duty-Standby Vacuum Pumps
- Integrated Level and Alarm Control
- Compact Serviceable Skid
مقدمة المنتج
The vacuum drainage system combines a sealed stainless receiver, vacuum generation equipment, discharge valves and controls on a coordinated skid. Collection branches operate below atmospheric pressure so waste can be moved from locations where continuous gravity fall is impractical. Level instruments sequence filling and discharge, while local alarms and optional building-management contacts report abnormal vacuum or receiver conditions.
الخصائص الرئيسية
Duty-standby pump configurations support operational continuity and maintenance.
Level switches and pressure monitoring coordinate collection, discharge and alarm states.
Grouped valves, pumps and controls keep routine service access on the packaged skid.
مخاوف المنتج للعملاء
Some controlled facilities cannot maintain gravity fall from every collection point and need reliable transport without frequent intervention inside clean rooms.
Flat or congested service routes cannot provide continuous gravity slope.A controlled vacuum network transports collected waste through smaller routed pipework.
Loss of vacuum can interrupt several connected collection points.Pressure monitoring and alarm contacts identify abnormal vacuum conditions for prompt response.
Receiver overflow can contaminate pumps or surrounding service areas.Multiple level points sequence discharge and provide independent high-level alarming.
Maintenance inside clean areas disrupts operations and contamination control.Vacuum generation, receiver, valves and controls are grouped on an accessible utility-side skid.
تطبيقات نموذجية
Retrofit cleanroomsBelow-grade collection pointsUtility-constrained process suitesDistributed equipment waste collection
المعلمات الفنية
Typical packaged-skid construction ranges are shown below; receiver volume, pump duty, controls and wetted materials are selected for the connected load and waste stream.
| المواد الأساسية | AISI 304 or 316L stainless steel wetted receiver and piping |
|---|---|
| سمك اللوحة | 2.0-4.0 mm receiver and skid-mounted vessel wall |
| العرض الفعال | 600-1500 mm packaged skid width |
| الحد الأقصى الطول | Up to 2500 mm packaged skid length |
| الصلب يواجه سمك | 1.5-2.0 mm control enclosure skin |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless wetted parts |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless wetted parts |
| إنهاء السطح | Passivated stainless wetted surfaces with powder-coated or stainless support frame |
| نوع المشترك | Vacuum-rated push-fit, hygienic clamp or welded process connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Receiver volume selectionSingle or duty-standby pumps304 or 316L wetted partsRemote alarm and BMS interface
Planning a Vacuum Drainage System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
