English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Система вакуумного дренажа
Packaged vacuum drainage assembly using a receiver, controls and vacuum-compatible piping to move waste where gravity fall is limited.
- Sealed Stainless Receiver
- Duty-Standby Vacuum Pumps
- Integrated Level and Alarm Control
- Compact Serviceable Skid
Введение продукции
The vacuum drainage system combines a sealed stainless receiver, vacuum generation equipment, discharge valves and controls on a coordinated skid. Collection branches operate below atmospheric pressure so waste can be moved from locations where continuous gravity fall is impractical. Level instruments sequence filling and discharge, while local alarms and optional building-management contacts report abnormal vacuum or receiver conditions.
Основные характеристики
Duty-standby pump configurations support operational continuity and maintenance.
Level switches and pressure monitoring coordinate collection, discharge and alarm states.
Grouped valves, pumps and controls keep routine service access on the packaged skid.
Обеспокоенность клиентов продуктами
Some controlled facilities cannot maintain gravity fall from every collection point and need reliable transport without frequent intervention inside clean rooms.
Flat or congested service routes cannot provide continuous gravity slope.A controlled vacuum network transports collected waste through smaller routed pipework.
Loss of vacuum can interrupt several connected collection points.Pressure monitoring and alarm contacts identify abnormal vacuum conditions for prompt response.
Receiver overflow can contaminate pumps or surrounding service areas.Multiple level points sequence discharge and provide independent high-level alarming.
Maintenance inside clean areas disrupts operations and contamination control.Vacuum generation, receiver, valves and controls are grouped on an accessible utility-side skid.
Типичные приложения
Retrofit cleanroomsBelow-grade collection pointsUtility-constrained process suitesDistributed equipment waste collection
Технические параметры
Typical packaged-skid construction ranges are shown below; receiver volume, pump duty, controls and wetted materials are selected for the connected load and waste stream.
| Основной материал | AISI 304 or 316L stainless steel wetted receiver and piping |
|---|---|
| Толщина панели | 2.0-4.0 mm receiver and skid-mounted vessel wall |
| эффективная ширина | 600-1500 mm packaged skid width |
| Максимальная длина | Up to 2500 mm packaged skid length |
| Толщина линий стали | 1.5-2.0 mm control enclosure skin |
| Плотность ядра | 7900-8000 kg/m³ for stainless wetted parts |
| Теплопроводимость | 14-16 W/(m·K) for stainless wetted parts |
| Поверхностная отделка | Passivated stainless wetted surfaces with powder-coated or stainless support frame |
| Объединенный тип | Vacuum-rated push-fit, hygienic clamp or welded process connections |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Receiver volume selectionSingle or duty-standby pumps304 or 316L wetted partsRemote alarm and BMS interface
Planning a Vacuum Drainage System specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
