Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Drainage, Hygiene und Sicherheitsgeräte
Das Vakuum Drainage System
Packaged vacuum drainage assembly using a receiver, controls and vacuum-compatible piping to move waste where gravity fall is limited.
- Sealed Stainless Receiver
- Duty-Standby Vacuum Pumps
- Integrated Level and Alarm Control
- Compact Serviceable Skid
Produkteinführung
The vacuum drainage system combines a sealed stainless receiver, vacuum generation equipment, discharge valves and controls on a coordinated skid. Collection branches operate below atmospheric pressure so waste can be moved from locations where continuous gravity fall is impractical. Level instruments sequence filling and discharge, while local alarms and optional building-management contacts report abnormal vacuum or receiver conditions.
Key Features
Duty-standby pump configurations support operational continuity and maintenance.
Level switches and pressure monitoring coordinate collection, discharge and alarm states.
Grouped valves, pumps and controls keep routine service access on the packaged skid.
Kunden Produktbedenken
Some controlled facilities cannot maintain gravity fall from every collection point and need reliable transport without frequent intervention inside clean rooms.
Flat or congested service routes cannot provide continuous gravity slope.A controlled vacuum network transports collected waste through smaller routed pipework.
Loss of vacuum can interrupt several connected collection points.Pressure monitoring and alarm contacts identify abnormal vacuum conditions for prompt response.
Receiver overflow can contaminate pumps or surrounding service areas.Multiple level points sequence discharge and provide independent high-level alarming.
Maintenance inside clean areas disrupts operations and contamination control.Vacuum generation, receiver, valves and controls are grouped on an accessible utility-side skid.
Typische Anwendungen
Retrofit ReinräumeBelow-grade collection pointsUtility-constrained process suitesDistributed equipment waste collection
Technische Parameter
Typical packaged-skid construction ranges are shown below; receiver volume, pump duty, controls and wetted materials are selected for the connected load and waste stream.
| Core Material | AISI 304 or 316L stainless steel wetted receiver and piping |
|---|---|
| Panel Dicke | 2.0-4.0 mm receiver and skid-mounted vessel wall |
| Effektive Breite | 600-1500 mm packaged skid width |
| Maximale Länge | Up to 2500 mm packaged skid length |
| Stahl facing Dicke | 1.5-2.0 mm control enclosure skin |
| Kerndichte | 7900-8000 kg/m³ for stainless wetted parts |
| Thermische Leitfähigkeit | 14-16 W/(m·K) for stainless wetted parts |
| Oberfläche Finish | Passivated stainless wetted surfaces with powder-coated or stainless support frame |
| Gemeinsamer Typ | Vacuum-rated push-fit, hygienic clamp or welded process connections |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Receiver volume selectionSingle or duty-standby pumps304 or 316L wetted partsRemote alarm and BMS interface
Planning a Vacuum Drainage System specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
