Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Cleanroom Drainage, Peralatan Kebersihan dan Keselamatan
Sistem Drainase Vakum (Vacuum Drainage System)
Packaged vacuum drainage assembly using a receiver, controls and vacuum-compatible piping to move waste where gravity fall is limited.
- Sealed Stainless Receiver
- Duty-Standby Vacuum Pumps
- Integrated Level and Alarm Control
- Compact Serviceable Skid
Perkenalan produk
The vacuum drainage system combines a sealed stainless receiver, vacuum generation equipment, discharge valves and controls on a coordinated skid. Collection branches operate below atmospheric pressure so waste can be moved from locations where continuous gravity fall is impractical. Level instruments sequence filling and discharge, while local alarms and optional building-management contacts report abnormal vacuum or receiver conditions.
Fitur utama:
Duty-standby pump configurations support operational continuity and maintenance.
Level switches and pressure monitoring coordinate collection, discharge and alarm states.
Grouped valves, pumps and controls keep routine service access on the packaged skid.
Kekhawatiran produk pelanggan
Some controlled facilities cannot maintain gravity fall from every collection point and need reliable transport without frequent intervention inside clean rooms.
Flat or congested service routes cannot provide continuous gravity slope.A controlled vacuum network transports collected waste through smaller routed pipework.
Loss of vacuum can interrupt several connected collection points.Pressure monitoring and alarm contacts identify abnormal vacuum conditions for prompt response.
Receiver overflow can contaminate pumps or surrounding service areas.Multiple level points sequence discharge and provide independent high-level alarming.
Maintenance inside clean areas disrupts operations and contamination control.Vacuum generation, receiver, valves and controls are grouped on an accessible utility-side skid.
Aplikasi yang Tipis
Retrofit cleanroomBelow-grade collection pointsUtility-constrained process suitesDistributed equipment waste collection
Parameter teknis
Typical packaged-skid construction ranges are shown below; receiver volume, pump duty, controls and wetted materials are selected for the connected load and waste stream.
| Bahan inti | AISI 304 or 316L stainless steel wetted receiver and piping |
|---|---|
| Ketebalan Panel (Panel Thickness) | 2.0-4.0 mm receiver and skid-mounted vessel wall |
| Efektif lebar | 600-1500 mm packaged skid width |
| Panjang maksimum | Up to 2500 mm packaged skid length |
| Baja menghadap ketebalan | 1.5-2.0 mm control enclosure skin |
| Kepadatan inti (core density) | 7900-8000 kg/m³ for stainless wetted parts |
| Konduktivitas Termal (Thermal Conductivity) | 14-16 W/(m·K) for stainless wetted parts |
| Permukaan selesai | Passivated stainless wetted surfaces with powder-coated or stainless support frame |
| Jenis Bersama | Vacuum-rated push-fit, hygienic clamp or welded process connections |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Receiver volume selectionSingle or duty-standby pumps304 or 316L wetted partsRemote alarm and BMS interface
Planning a Vacuum Drainage System specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
