Complete packaged vacuum drainage skid in three-quarter view

클린룸 배수, 위생 및 안전 장비

진공 배수 시스템

Packaged vacuum drainage assembly using a receiver, controls and vacuum-compatible piping to move waste where gravity fall is limited.

Sealed Stainless Receiver
Duty-Standby Vacuum Pumps
Integrated Level and Alarm Control
Compact Serviceable Skid

견적 요청 제품 찾아보기

상품 소개

The vacuum drainage system combines a sealed stainless receiver, vacuum generation equipment, discharge valves and controls on a coordinated skid. Collection branches operate below atmospheric pressure so waste can be moved from locations where continuous gravity fall is impractical. Level instruments sequence filling and discharge, while local alarms and optional building-management contacts report abnormal vacuum or receiver conditions.

주요 기능

A sealed receiver separates collected liquid from the vacuum generation circuit.

Duty-standby pump configurations support operational continuity and maintenance.

Level switches and pressure monitoring coordinate collection, discharge and alarm states.

Grouped valves, pumps and controls keep routine service access on the packaged skid.

고객 제품 관심사

Some controlled facilities cannot maintain gravity fall from every collection point and need reliable transport without frequent intervention inside clean rooms.

Flat or congested service routes cannot provide continuous gravity slope.A controlled vacuum network transports collected waste through smaller routed pipework.

Loss of vacuum can interrupt several connected collection points.Pressure monitoring and alarm contacts identify abnormal vacuum conditions for prompt response.

Receiver overflow can contaminate pumps or surrounding service areas.Multiple level points sequence discharge and provide independent high-level alarming.

Maintenance inside clean areas disrupts operations and contamination control.Vacuum generation, receiver, valves and controls are grouped on an accessible utility-side skid.

일반적인 응용 프로그램

클린룸을 개조하다Below-grade collection pointsUtility-constrained process suitesDistributed equipment waste collection

기술 매개변수

Typical packaged-skid construction ranges are shown below; receiver volume, pump duty, controls and wetted materials are selected for the connected load and waste stream.

핵심 재료	AISI 304 or 316L stainless steel wetted receiver and piping
패널 두께	2.0-4.0 mm receiver and skid-mounted vessel wall
유효 폭	600-1500 mm packaged skid width
최대 길이	Up to 2500 mm packaged skid length
강철 면면 두께	1.5-2.0 mm control enclosure skin
코어 밀도	7900-8000 kg/m³ for stainless wetted parts
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for stainless wetted parts
표면 마무리	Passivated stainless wetted surfaces with powder-coated or stainless support frame
접합 유형	Vacuum-rated push-fit, hygienic clamp or welded process connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Receiver volume selectionSingle or duty-standby pumps304 or 316L wetted partsRemote alarm and BMS interface

Planning a Vacuum Drainage System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.