Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Sistema de drenaje de vacío
Packaged vacuum drainage assembly using a receiver, controls and vacuum-compatible piping to move waste where gravity fall is limited.
- Sealed Stainless Receiver
- Duty-Standby Vacuum Pumps
- Integrated Level and Alarm Control
- Compact Serviceable Skid
Introducción del producto
The vacuum drainage system combines a sealed stainless receiver, vacuum generation equipment, discharge valves and controls on a coordinated skid. Collection branches operate below atmospheric pressure so waste can be moved from locations where continuous gravity fall is impractical. Level instruments sequence filling and discharge, while local alarms and optional building-management contacts report abnormal vacuum or receiver conditions.
Características clave
Duty-standby pump configurations support operational continuity and maintenance.
Level switches and pressure monitoring coordinate collection, discharge and alarm states.
Grouped valves, pumps and controls keep routine service access on the packaged skid.
Preocupaciones del producto del cliente
Some controlled facilities cannot maintain gravity fall from every collection point and need reliable transport without frequent intervention inside clean rooms.
Flat or congested service routes cannot provide continuous gravity slope.A controlled vacuum network transports collected waste through smaller routed pipework.
Loss of vacuum can interrupt several connected collection points.Pressure monitoring and alarm contacts identify abnormal vacuum conditions for prompt response.
Receiver overflow can contaminate pumps or surrounding service areas.Multiple level points sequence discharge and provide independent high-level alarming.
Maintenance inside clean areas disrupts operations and contamination control.Vacuum generation, receiver, valves and controls are grouped on an accessible utility-side skid.
Aplicaciones típicas
Retrofit CleanroomsBelow-grade collection pointsUtility-constrained process suitesDistributed equipment waste collection
Parámetros técnicos
Typical packaged-skid construction ranges are shown below; receiver volume, pump duty, controls and wetted materials are selected for the connected load and waste stream.
| Materiales Core | AISI 304 or 316L stainless steel wetted receiver and piping |
|---|---|
| Panel de espesor | 2.0-4.0 mm receiver and skid-mounted vessel wall |
| Ancho efectivo | 600-1500 mm packaged skid width |
| Longitud máxima | Up to 2500 mm packaged skid length |
| Acero frente a espesor | 1.5-2.0 mm control enclosure skin |
| Densidad Core | 7900-8000 kg/m³ for stainless wetted parts |
| Conductividad térmica | 14-16 W/(m·K) for stainless wetted parts |
| Superficie acabada | Passivated stainless wetted surfaces with powder-coated or stainless support frame |
| Tipo conjunto | Vacuum-rated push-fit, hygienic clamp or welded process connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Receiver volume selectionSingle or duty-standby pumps304 or 316L wetted partsRemote alarm and BMS interface
Planning a Vacuum Drainage System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
