Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Caixa de passagem de tratamento de material UV-C
An interlocked transfer chamber with shielded UV-C lamps for timed treatment of accessible surfaces on compatible materials.
- Shielded UV-C Lamps
- Timed Exposure Control
- Door-Open Power Cut-Off
- Reflective Chamber Interior
Introdução do produto
This UV-C pass box places protected lamps around a reflective stainless transfer chamber. When both doors are closed, a timed programme energises the lamps for the selected treatment period; independent door switches remove power before either door can open. A perforated shelf can improve exposure below smaller items, but shadowed, opaque or closely stacked surfaces still require suitable loading practice.
Características-chave
Hard-wired door switches de-energise lamps before access.
A run-time counter supports planned lamp maintenance.
A removable perforated shelf reduces shadowing beneath small loads.
Adjustable exposure timing accommodates compatible packaging materials.
Preocupações do produto do cliente
UV-C treatment relies on direct exposure, suitable loading and electrical safeguards; it is not a universal surface-treatment claim.
Stacked or opaque items leave shadowed surfaces untreated.Reflective walls, a perforated shelf and loading guidance improve exposure of accessible surfaces.
A door opens while UV-C lamps are energised.Independent hard-wired cut-off switches remove lamp power before release.
A lamp still glows but its output has declined.A cumulative operating-hour counter supports a planned replacement interval.
Sensitive plastics or labels are affected by a long cycle.Exposure time is adjustable for compatible material and the intended process.
Aplicações típicas
Laboratory sample containersPharmaceutical secondary packagingSmall cleanroom toolsMedical-device component transfer
Parâmetros técnicos
Representative stainless construction ranges for a UV-C material treatment pass box are shown below.
| Material principal | Double-wall SUS 304 chamber with shielded UV-C lamps, perforated shelf, timer and safety switches |
|---|---|
| Painel de espessura | 50-80 mm double-wall cabinet construction |
| Largura efetiva | 400-1000 mm clear exposure width |
| Comprimento máximo | Up to 1200 mm chamber depth |
| Aço enfrentando espessura | 1.0-1.5 mm stainless-steel facing |
| Densidade Core | 30-35 kg/m³ polyurethane insulation in the double-wall service space |
| Condutividade térmica | 0.023-0.029 W/(m·K) for polyurethane cabinet infill |
| Superfície acabado | Reflective brushed stainless interior with radiused corners and cleanable lamp guards |
| Tipo conjunto | Sealed cabinet body with electrically interlocked gasketed doors and guarded lamp penetrations |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
254 nm low-pressure UV-C lampsLamp run-time counterPerforated removable shelfInterior UV intensity sensor
Planning a UV-C Material Treatment Pass Box specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
