Stainless UV-C material treatment pass box with glazed interlocked door

人員 · 材料の汚染除去設備

UV—C 材料の処理のパスボックス

An interlocked transfer chamber with shielded UV-C lamps for timed treatment of accessible surfaces on compatible materials.

Shielded UV-C Lamps
Timed Exposure Control
Door-Open Power Cut-Off
Reflective Chamber Interior

見積もりリクエスト製品案内

商品紹介

This UV-C pass box places protected lamps around a reflective stainless transfer chamber. When both doors are closed, a timed programme energises the lamps for the selected treatment period; independent door switches remove power before either door can open. A perforated shelf can improve exposure below smaller items, but shadowed, opaque or closely stacked surfaces still require suitable loading practice.

主要な特徴

Guarded lamp housings protect lamps from payload impact.

Hard-wired door switches de-energise lamps before access.

A run-time counter supports planned lamp maintenance.

A removable perforated shelf reduces shadowing beneath small loads.

Adjustable exposure timing accommodates compatible packaging materials.

お客様の製品に関する懸念事項

UV-C treatment relies on direct exposure, suitable loading and electrical safeguards; it is not a universal surface-treatment claim.

Stacked or opaque items leave shadowed surfaces untreated.Reflective walls, a perforated shelf and loading guidance improve exposure of accessible surfaces.

A door opens while UV-C lamps are energised.Independent hard-wired cut-off switches remove lamp power before release.

A lamp still glows but its output has declined.A cumulative operating-hour counter supports a planned replacement interval.

Sensitive plastics or labels are affected by a long cycle.Exposure time is adjustable for compatible material and the intended process.

典型的な用途

Laboratory sample containersPharmaceutical secondary packagingSmall cleanroom toolsMedical-device component transfer

技術的なパラメータ

Representative stainless construction ranges for a UV-C material treatment pass box are shown below.

コア材料	Double-wall SUS 304 chamber with shielded UV-C lamps, perforated shelf, timer and safety switches
パネルの厚さ	50-80 mm double-wall cabinet construction
有効幅	400-1000 mm clear exposure width
最大長さ	Up to 1200 mm chamber depth
鋼鉄の厚さを直面する	1.0 — 1.5mm ステンレス鋼の面
コア密度	30-35 kg/m³ polyurethane insulation in the double-wall service space
熱伝導率	0.023-0.029 W/(m·K) for polyurethane cabinet infill
表面仕上げ	Reflective brushed stainless interior with radiused corners and cleanable lamp guards
ジョイントタイプ	Sealed cabinet body with electrically interlocked gasketed doors and guarded lamp penetrations
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

254 nm low-pressure UV-C lampsLamp run-time counterPerforated removable shelfInterior UV intensity sensor

Planning a UV-C Material Treatment Pass Box specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する