Stainless UV-C material treatment pass box with glazed interlocked door

Персонал и оборудование для дезактивации материалов

Коробка пропуска для обработки материалов УФ-С

An interlocked transfer chamber with shielded UV-C lamps for timed treatment of accessible surfaces on compatible materials.

Shielded UV-C Lamps
Timed Exposure Control
Door-Open Power Cut-Off
Reflective Chamber Interior

Запрос котировки Просмотреть продукты

Введение продукции

This UV-C pass box places protected lamps around a reflective stainless transfer chamber. When both doors are closed, a timed programme energises the lamps for the selected treatment period; independent door switches remove power before either door can open. A perforated shelf can improve exposure below smaller items, but shadowed, opaque or closely stacked surfaces still require suitable loading practice.

Основные характеристики

Guarded lamp housings protect lamps from payload impact.

Hard-wired door switches de-energise lamps before access.

A run-time counter supports planned lamp maintenance.

A removable perforated shelf reduces shadowing beneath small loads.

Adjustable exposure timing accommodates compatible packaging materials.

Обеспокоенность клиентов продуктами

UV-C treatment relies on direct exposure, suitable loading and electrical safeguards; it is not a universal surface-treatment claim.

Stacked or opaque items leave shadowed surfaces untreated.Reflective walls, a perforated shelf and loading guidance improve exposure of accessible surfaces.

A door opens while UV-C lamps are energised.Independent hard-wired cut-off switches remove lamp power before release.

A lamp still glows but its output has declined.A cumulative operating-hour counter supports a planned replacement interval.

Sensitive plastics or labels are affected by a long cycle.Exposure time is adjustable for compatible material and the intended process.

Типичные приложения

Laboratory sample containersPharmaceutical secondary packagingSmall cleanroom toolsMedical-device component transfer

Технические параметры

Representative stainless construction ranges for a UV-C material treatment pass box are shown below.

Основной материал	Double-wall SUS 304 chamber with shielded UV-C lamps, perforated shelf, timer and safety switches
Толщина панели	50-80 mm double-wall cabinet construction
эффективная ширина	400-1000 mm clear exposure width
Максимальная длина	Up to 1200 mm chamber depth
Толщина линий стали	1.0-1.5 mm stainless-steel facing
Плотность ядра	30-35 kg/m³ polyurethane insulation in the double-wall service space
Теплопроводимость	0.023-0.029 W/(m·K) for polyurethane cabinet infill
Поверхностная отделка	Reflective brushed stainless interior with radiused corners and cleanable lamp guards
Объединенный тип	Sealed cabinet body with electrically interlocked gasketed doors and guarded lamp penetrations
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

254 nm low-pressure UV-C lampsLamp run-time counterPerforated removable shelfInterior UV intensity sensor

Planning a UV-C Material Treatment Pass Box specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой