Stainless UV-C material treatment pass box with glazed interlocked door

인력 및 재료 오염 제거 장비

UV - C 재료 처리 패스 박스

An interlocked transfer chamber with shielded UV-C lamps for timed treatment of accessible surfaces on compatible materials.

Shielded UV-C Lamps
Timed Exposure Control
Door-Open Power Cut-Off
Reflective Chamber Interior

견적 요청 제품 찾아보기

상품 소개

This UV-C pass box places protected lamps around a reflective stainless transfer chamber. When both doors are closed, a timed programme energises the lamps for the selected treatment period; independent door switches remove power before either door can open. A perforated shelf can improve exposure below smaller items, but shadowed, opaque or closely stacked surfaces still require suitable loading practice.

주요 기능

Guarded lamp housings protect lamps from payload impact.

Hard-wired door switches de-energise lamps before access.

A run-time counter supports planned lamp maintenance.

A removable perforated shelf reduces shadowing beneath small loads.

Adjustable exposure timing accommodates compatible packaging materials.

고객 제품 관심사

UV-C treatment relies on direct exposure, suitable loading and electrical safeguards; it is not a universal surface-treatment claim.

Stacked or opaque items leave shadowed surfaces untreated.Reflective walls, a perforated shelf and loading guidance improve exposure of accessible surfaces.

A door opens while UV-C lamps are energised.Independent hard-wired cut-off switches remove lamp power before release.

A lamp still glows but its output has declined.A cumulative operating-hour counter supports a planned replacement interval.

Sensitive plastics or labels are affected by a long cycle.Exposure time is adjustable for compatible material and the intended process.

일반적인 응용 프로그램

Laboratory sample containersPharmaceutical secondary packagingSmall cleanroom toolsMedical-device component transfer

기술 매개변수

Representative stainless construction ranges for a UV-C material treatment pass box are shown below.

핵심 재료	Double-wall SUS 304 chamber with shielded UV-C lamps, perforated shelf, timer and safety switches
패널 두께	50-80 mm double-wall cabinet construction
유효 폭	400-1000 mm clear exposure width
최대 길이	Up to 1200 mm chamber depth
강철 면면 두께	1. 0 - 1. 5 mm 스테인레스 스틸 면재
코어 밀도	30-35 kg/m³ polyurethane insulation in the double-wall service space
열전도도 (Thermal Conductivity)	0.023-0.029 W/(m·K) for polyurethane cabinet infill
표면 마무리	Reflective brushed stainless interior with radiused corners and cleanable lamp guards
접합 유형	Sealed cabinet body with electrically interlocked gasketed doors and guarded lamp penetrations
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

254 nm low-pressure UV-C lampsLamp run-time counterPerforated removable shelfInterior UV intensity sensor

Planning a UV-C Material Treatment Pass Box specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.