Stainless UV-C material treatment pass box with glazed interlocked door

Peralatan Dekontaminasi Kakitangan dan Bahan

Kotak Pas Rawatan Bahan UV-C

An interlocked transfer chamber with shielded UV-C lamps for timed treatment of accessible surfaces on compatible materials.

Shielded UV-C Lamps
Timed Exposure Control
Door-Open Power Cut-Off
Reflective Chamber Interior

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This UV-C pass box places protected lamps around a reflective stainless transfer chamber. When both doors are closed, a timed programme energises the lamps for the selected treatment period; independent door switches remove power before either door can open. A perforated shelf can improve exposure below smaller items, but shadowed, opaque or closely stacked surfaces still require suitable loading practice.

Ciri-ciri Utama

Guarded lamp housings protect lamps from payload impact.

Hard-wired door switches de-energise lamps before access.

A run-time counter supports planned lamp maintenance.

A removable perforated shelf reduces shadowing beneath small loads.

Adjustable exposure timing accommodates compatible packaging materials.

Kebimbangan Produk Pelanggan

UV-C treatment relies on direct exposure, suitable loading and electrical safeguards; it is not a universal surface-treatment claim.

Stacked or opaque items leave shadowed surfaces untreated.Reflective walls, a perforated shelf and loading guidance improve exposure of accessible surfaces.

A door opens while UV-C lamps are energised.Independent hard-wired cut-off switches remove lamp power before release.

A lamp still glows but its output has declined.A cumulative operating-hour counter supports a planned replacement interval.

Sensitive plastics or labels are affected by a long cycle.Exposure time is adjustable for compatible material and the intended process.

Permohonan yang biasa

Laboratory sample containersPharmaceutical secondary packagingSmall cleanroom toolsMedical-device component transfer

Parameter teknikal

Representative stainless construction ranges for a UV-C material treatment pass box are shown below.

Bahan Teras	Double-wall SUS 304 chamber with shielded UV-C lamps, perforated shelf, timer and safety switches
Ketebalan Panel	50-80 mm double-wall cabinet construction
Lebar berkesan	400-1000 mm clear exposure width
Panjang maksimum	Up to 1200 mm chamber depth
Keluli Menghadapi Ketebalan	1.0-1.5 mm menghadap keluli tahan karat
Ketumpatan teras	30-35 kg/m³ polyurethane insulation in the double-wall service space
Kekonduksian Terma	0.023-0.029 W/(m·K) for polyurethane cabinet infill
Kemasan permukaan	Reflective brushed stainless interior with radiused corners and cleanable lamp guards
Jenis Bersatu	Sealed cabinet body with electrically interlocked gasketed doors and guarded lamp penetrations
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

254 nm low-pressure UV-C lampsLamp run-time counterPerforated removable shelfInterior UV intensity sensor

Planning a UV-C Material Treatment Pass Box specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami