Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Z UV-C Matériau Traitement Pass Box
An interlocked transfer chamber with shielded UV-C lamps for timed treatment of accessible surfaces on compatible materials.
- Shielded UV-C Lamps
- Timed Exposure Control
- Door-Open Power Cut-Off
- Reflective Chamber Interior
Introduction de produit
This UV-C pass box places protected lamps around a reflective stainless transfer chamber. When both doors are closed, a timed programme energises the lamps for the selected treatment period; independent door switches remove power before either door can open. A perforated shelf can improve exposure below smaller items, but shadowed, opaque or closely stacked surfaces still require suitable loading practice.
Key Features
Hard-wired door switches de-energise lamps before access.
A run-time counter supports planned lamp maintenance.
A removable perforated shelf reduces shadowing beneath small loads.
Adjustable exposure timing accommodates compatible packaging materials.
Préoccupations du client produit
UV-C treatment relies on direct exposure, suitable loading and electrical safeguards; it is not a universal surface-treatment claim.
Stacked or opaque items leave shadowed surfaces untreated.Reflective walls, a perforated shelf and loading guidance improve exposure of accessible surfaces.
A door opens while UV-C lamps are energised.Independent hard-wired cut-off switches remove lamp power before release.
A lamp still glows but its output has declined.A cumulative operating-hour counter supports a planned replacement interval.
Sensitive plastics or labels are affected by a long cycle.Exposure time is adjustable for compatible material and the intended process.
Les applications typiques
Laboratory sample containersPharmaceutical secondary packagingSmall cleanroom toolsMedical-device component transfer
Paramètres techniques
Representative stainless construction ranges for a UV-C material treatment pass box are shown below.
| Matériaux de base | Double-wall SUS 304 chamber with shielded UV-C lamps, perforated shelf, timer and safety switches |
|---|---|
| Panneau épaisseur | Construction de cabinet à double mur de 50 - 80 mm |
| Largeur effective | 400-1000 mm clear exposure width |
| Longueur maximale | Profondeur de chambre jusqu'à 1200 mm |
| Acier face épaisseur | 1,0 - 1,5 mm en acier inoxydable |
| Densité Core | 30-35 kg/m³ polyurethane insulation in the double-wall service space |
| Conductivité thermique | 0.023-0.029 W/(m·K) for polyurethane cabinet infill |
| surface finie | Reflective brushed stainless interior with radiused corners and cleanable lamp guards |
| Type joint | Sealed cabinet body with electrically interlocked gasketed doors and guarded lamp penetrations |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
254 nm low-pressure UV-C lampsLamp run-time counterPerforated removable shelfInterior UV intensity sensor
Planning a UV-C Material Treatment Pass Box specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
