Industrial ultrasonic humidifier with twin top mist outlets

Equipamento de manuseio de ar e HVAC para sala limpa

Z Umidificador ultrassônico

A low-energy adiabatic humidifier that uses piezoelectric transducers to create a fine cool mist for direct-room or short-duct distribution.

Piezoelectric Fine Mist
Low Electrical Input
Cool Adiabatic Output
Modular Transducer Service

Solicite um orçamento. Browse produtos

Introdução do produto

Piezoelectric transducers vibrate beneath a controlled shallow water level and break the surface into microscopic droplets. Internal blowers carry the mist from the stainless reservoir through top outlets, where it evaporates into dry air. Because the system does not boil water, electrical demand is low and the evaporation also provides a modest cooling effect.

Características-chave

High-frequency transducers create fine droplets without electric boiling elements.

Low power consumption makes the technology suitable for continuous high-duty humidity control.

A stainless reservoir, level control and periodic drain cycle manage the transducer water surface.

Modular transducer plates and accessible blower components can be serviced from the front.

Preocupações do produto do cliente

Ultrasonic systems need clean feed water, adequate absorption distance and accessible transducers to avoid mineral dust or wetting.

Minerals in atomized mains water settle as white dust.Reverse-osmosis or demineralized feed water limits dissolved solids carried into the air.

Large droplets fall before evaporating and wet nearby surfaces.Correct transducer output and blower airflow produce fine mist within the available absorption volume.

Biofilm forms in stagnant reservoir water.Automatic flushing, controlled refill and accessible stainless tank surfaces support hygienic maintenance.

A failed transducer reduces output across the complete unit.Modular transducer plates allow the affected section to be replaced independently.

Aplicações típicas

Electronics cleanroomsTextile and printing productionCold storage and produce roomsLaboratory environmental roomsDirect humidification of clean manufacturing spaces

Parâmetros técnicos

Typical construction and size ranges for an industrial ultrasonic humidifier are shown below.

Material principal	Stainless water reservoir with piezoelectric ceramic transducer modules
Painel de espessura	1.0-1.5 mm stainless and powder-coated cabinet panels
Largura efetiva	500-1400 mm cabinet width
Comprimento máximo	Up to 406 mm overall cabinet depth
Aço enfrentando espessura	1.0-1.5 mm stainless enclosure sheet
Densidade Core	Approximately 7500-7800 kg/m³ for piezoelectric ceramic transducer material
Condutividade térmica	Approximately 1.2-2.0 W/(m·K) for piezoelectric ceramic
Superfície acabado	White-blue powder-coated exterior with smooth stainless wetted tank
Tipo conjunto	Bolted service cabinet with modular transducer plates, hose outlets and threaded water port
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

3-18 kg/h modular output configurationsDirect-room blower or duct connectionReverse-osmosis water packageHumidity controller, flush cycle and remote monitoring

Planning a Ultrasonic Humidifier specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe