Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Ultraschallfeuchter
A low-energy adiabatic humidifier that uses piezoelectric transducers to create a fine cool mist for direct-room or short-duct distribution.
- Piezoelectric Fine Mist
- Low Electrical Input
- Cool Adiabatic Output
- Modular Transducer Service
Produkteinführung
Piezoelectric transducers vibrate beneath a controlled shallow water level and break the surface into microscopic droplets. Internal blowers carry the mist from the stainless reservoir through top outlets, where it evaporates into dry air. Because the system does not boil water, electrical demand is low and the evaporation also provides a modest cooling effect.
Key Features
Low power consumption makes the technology suitable for continuous high-duty humidity control.
A stainless reservoir, level control and periodic drain cycle manage the transducer water surface.
Modular transducer plates and accessible blower components can be serviced from the front.
Kunden Produktbedenken
Ultrasonic systems need clean feed water, adequate absorption distance and accessible transducers to avoid mineral dust or wetting.
Minerals in atomized mains water settle as white dust.Reverse-osmosis or demineralized feed water limits dissolved solids carried into the air.
Large droplets fall before evaporating and wet nearby surfaces.Correct transducer output and blower airflow produce fine mist within the available absorption volume.
Biofilm forms in stagnant reservoir water.Automatic flushing, controlled refill and accessible stainless tank surfaces support hygienic maintenance.
A failed transducer reduces output across the complete unit.Modular transducer plates allow the affected section to be replaced independently.
Typische Anwendungen
Electronics cleanroomsTextile and printing productionCold storage and produce roomsLaboratory environmental roomsDirect humidification of clean manufacturing spaces
Technische Parameter
Typical construction and size ranges for an industrial ultrasonic humidifier are shown below.
| Core Material | Stainless water reservoir with piezoelectric ceramic transducer modules |
|---|---|
| Panel Dicke | 1.0-1.5 mm stainless and powder-coated cabinet panels |
| Effektive Breite | 500-1400 mm cabinet width |
| Maximale Länge | Up to 406 mm overall cabinet depth |
| Stahl facing Dicke | 1.0-1.5 mm stainless enclosure sheet |
| Kerndichte | Approximately 7500-7800 kg/m³ for piezoelectric ceramic transducer material |
| Thermische Leitfähigkeit | Approximately 1.2-2.0 W/(m·K) for piezoelectric ceramic |
| Oberfläche Finish | White-blue powder-coated exterior with smooth stainless wetted tank |
| Gemeinsamer Typ | Bolted service cabinet with modular transducer plates, hose outlets and threaded water port |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
3-18 kg/h modular output configurationsDirect-room blower or duct connectionReverse-osmosis water packageHumidity controller, flush cycle and remote monitoring
Planning a Ultrasonic Humidifier specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
