English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة
الموجات فوق الصوتية المرطب
A low-energy adiabatic humidifier that uses piezoelectric transducers to create a fine cool mist for direct-room or short-duct distribution.
- Piezoelectric Fine Mist
- Low Electrical Input
- Cool Adiabatic Output
- Modular Transducer Service
مقدمة المنتج
Piezoelectric transducers vibrate beneath a controlled shallow water level and break the surface into microscopic droplets. Internal blowers carry the mist from the stainless reservoir through top outlets, where it evaporates into dry air. Because the system does not boil water, electrical demand is low and the evaporation also provides a modest cooling effect.
الخصائص الرئيسية
Low power consumption makes the technology suitable for continuous high-duty humidity control.
A stainless reservoir, level control and periodic drain cycle manage the transducer water surface.
Modular transducer plates and accessible blower components can be serviced from the front.
مخاوف المنتج للعملاء
Ultrasonic systems need clean feed water, adequate absorption distance and accessible transducers to avoid mineral dust or wetting.
Minerals in atomized mains water settle as white dust.Reverse-osmosis or demineralized feed water limits dissolved solids carried into the air.
Large droplets fall before evaporating and wet nearby surfaces.Correct transducer output and blower airflow produce fine mist within the available absorption volume.
Biofilm forms in stagnant reservoir water.Automatic flushing, controlled refill and accessible stainless tank surfaces support hygienic maintenance.
A failed transducer reduces output across the complete unit.Modular transducer plates allow the affected section to be replaced independently.
تطبيقات نموذجية
Electronics cleanroomsTextile and printing productionCold storage and produce roomsLaboratory environmental roomsDirect humidification of clean manufacturing spaces
المعلمات الفنية
Typical construction and size ranges for an industrial ultrasonic humidifier are shown below.
| المواد الأساسية | Stainless water reservoir with piezoelectric ceramic transducer modules |
|---|---|
| سمك اللوحة | 1.0-1.5 mm stainless and powder-coated cabinet panels |
| العرض الفعال | 500-1400 mm cabinet width |
| الحد الأقصى الطول | Up to 406 mm overall cabinet depth |
| الصلب يواجه سمك | 1.0-1.5 mm stainless enclosure sheet |
| الكثافة الأساسية | Approximately 7500-7800 kg/m³ for piezoelectric ceramic transducer material |
| الموصلية الحرارية | Approximately 1.2-2.0 W/(m·K) for piezoelectric ceramic |
| إنهاء السطح | White-blue powder-coated exterior with smooth stainless wetted tank |
| نوع المشترك | Bolted service cabinet with modular transducer plates, hose outlets and threaded water port |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
3-18 kg/h modular output configurationsDirect-room blower or duct connectionReverse-osmosis water packageHumidity controller, flush cycle and remote monitoring
Planning a Ultrasonic Humidifier specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
