İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda HVAC ve Hava İşleme Ekipmanları
Ultrasonik nemlendirici
A low-energy adiabatic humidifier that uses piezoelectric transducers to create a fine cool mist for direct-room or short-duct distribution.
- Piezoelectric Fine Mist
- Low Electrical Input
- Cool Adiabatic Output
- Modular Transducer Service
Ürün tanıtımı
Piezoelectric transducers vibrate beneath a controlled shallow water level and break the surface into microscopic droplets. Internal blowers carry the mist from the stainless reservoir through top outlets, where it evaporates into dry air. Because the system does not boil water, electrical demand is low and the evaporation also provides a modest cooling effect.
Ana Özellikler
Low power consumption makes the technology suitable for continuous high-duty humidity control.
A stainless reservoir, level control and periodic drain cycle manage the transducer water surface.
Modular transducer plates and accessible blower components can be serviced from the front.
Müşteri Ürün Sorunları
Ultrasonic systems need clean feed water, adequate absorption distance and accessible transducers to avoid mineral dust or wetting.
Minerals in atomized mains water settle as white dust.Reverse-osmosis or demineralized feed water limits dissolved solids carried into the air.
Large droplets fall before evaporating and wet nearby surfaces.Correct transducer output and blower airflow produce fine mist within the available absorption volume.
Biofilm forms in stagnant reservoir water.Automatic flushing, controlled refill and accessible stainless tank surfaces support hygienic maintenance.
A failed transducer reduces output across the complete unit.Modular transducer plates allow the affected section to be replaced independently.
Tipik uygulamalar
Electronics cleanroomsTextile and printing productionCold storage and produce roomsLaboratory environmental roomsDirect humidification of clean manufacturing spaces
Teknik parametreler
Typical construction and size ranges for an industrial ultrasonic humidifier are shown below.
| Temel malzemeler | Stainless water reservoir with piezoelectric ceramic transducer modules |
|---|---|
| Panel kalınlığı | 1.0-1.5 mm stainless and powder-coated cabinet panels |
| Effective Width (Etkili Genişlik) | 500-1400 mm cabinet width |
| Maksimum uzunluk | Up to 406 mm overall cabinet depth |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm stainless enclosure sheet |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7500-7800 kg/m³ for piezoelectric ceramic transducer material |
| Termal İletkenlik | Approximately 1.2-2.0 W/(m·K) for piezoelectric ceramic |
| Yüzey bitirme | White-blue powder-coated exterior with smooth stainless wetted tank |
| Ortak tip | Bolted service cabinet with modular transducer plates, hose outlets and threaded water port |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
3-18 kg/h modular output configurationsDirect-room blower or duct connectionReverse-osmosis water packageHumidity controller, flush cycle and remote monitoring
Planning a Ultrasonic Humidifier specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
