Industrial ultrasonic humidifier with twin top mist outlets

クリーンルーム HVAC および空気処理装置

超音波加湿器

A low-energy adiabatic humidifier that uses piezoelectric transducers to create a fine cool mist for direct-room or short-duct distribution.

Piezoelectric Fine Mist
Low Electrical Input
Cool Adiabatic Output
Modular Transducer Service

見積もりリクエスト製品案内

商品紹介

Piezoelectric transducers vibrate beneath a controlled shallow water level and break the surface into microscopic droplets. Internal blowers carry the mist from the stainless reservoir through top outlets, where it evaporates into dry air. Because the system does not boil water, electrical demand is low and the evaporation also provides a modest cooling effect.

主要な特徴

High-frequency transducers create fine droplets without electric boiling elements.

Low power consumption makes the technology suitable for continuous high-duty humidity control.

A stainless reservoir, level control and periodic drain cycle manage the transducer water surface.

Modular transducer plates and accessible blower components can be serviced from the front.

お客様の製品に関する懸念事項

Ultrasonic systems need clean feed water, adequate absorption distance and accessible transducers to avoid mineral dust or wetting.

Minerals in atomized mains water settle as white dust.Reverse-osmosis or demineralized feed water limits dissolved solids carried into the air.

Large droplets fall before evaporating and wet nearby surfaces.Correct transducer output and blower airflow produce fine mist within the available absorption volume.

Biofilm forms in stagnant reservoir water.Automatic flushing, controlled refill and accessible stainless tank surfaces support hygienic maintenance.

A failed transducer reduces output across the complete unit.Modular transducer plates allow the affected section to be replaced independently.

典型的な用途

Electronics cleanroomsTextile and printing productionCold storage and produce roomsLaboratory environmental roomsDirect humidification of clean manufacturing spaces

技術的なパラメータ

Typical construction and size ranges for an industrial ultrasonic humidifier are shown below.

コア材料	Stainless water reservoir with piezoelectric ceramic transducer modules
パネルの厚さ	1.0-1.5 mm stainless and powder-coated cabinet panels
有効幅	500-1400 mm cabinet width
最大長さ	Up to 406 mm overall cabinet depth
鋼鉄の厚さを直面する	1.0-1.5 mm stainless enclosure sheet
コア密度	Approximately 7500-7800 kg/m³ for piezoelectric ceramic transducer material
熱伝導率	Approximately 1.2-2.0 W/(m·K) for piezoelectric ceramic
表面仕上げ	White-blue powder-coated exterior with smooth stainless wetted tank
ジョイントタイプ	Bolted service cabinet with modular transducer plates, hose outlets and threaded water port
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

3-18 kg/h modular output configurationsDirect-room blower or duct connectionReverse-osmosis water packageHumidity controller, flush cycle and remote monitoring

Planning a Ultrasonic Humidifier specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する