Industrial ultrasonic humidifier with twin top mist outlets

클린룸 HVAC 및 공기 처리 장비

초음파 가습기

A low-energy adiabatic humidifier that uses piezoelectric transducers to create a fine cool mist for direct-room or short-duct distribution.

Piezoelectric Fine Mist
Low Electrical Input
Cool Adiabatic Output
Modular Transducer Service

견적 요청 제품 찾아보기

상품 소개

Piezoelectric transducers vibrate beneath a controlled shallow water level and break the surface into microscopic droplets. Internal blowers carry the mist from the stainless reservoir through top outlets, where it evaporates into dry air. Because the system does not boil water, electrical demand is low and the evaporation also provides a modest cooling effect.

주요 기능

High-frequency transducers create fine droplets without electric boiling elements.

Low power consumption makes the technology suitable for continuous high-duty humidity control.

A stainless reservoir, level control and periodic drain cycle manage the transducer water surface.

Modular transducer plates and accessible blower components can be serviced from the front.

고객 제품 관심사

Ultrasonic systems need clean feed water, adequate absorption distance and accessible transducers to avoid mineral dust or wetting.

Minerals in atomized mains water settle as white dust.Reverse-osmosis or demineralized feed water limits dissolved solids carried into the air.

Large droplets fall before evaporating and wet nearby surfaces.Correct transducer output and blower airflow produce fine mist within the available absorption volume.

Biofilm forms in stagnant reservoir water.Automatic flushing, controlled refill and accessible stainless tank surfaces support hygienic maintenance.

A failed transducer reduces output across the complete unit.Modular transducer plates allow the affected section to be replaced independently.

일반적인 응용 프로그램

Electronics cleanroomsTextile and printing productionCold storage and produce roomsLaboratory environmental roomsDirect humidification of clean manufacturing spaces

기술 매개변수

Typical construction and size ranges for an industrial ultrasonic humidifier are shown below.

핵심 재료	Stainless water reservoir with piezoelectric ceramic transducer modules
패널 두께	1.0-1.5 mm stainless and powder-coated cabinet panels
유효 폭	500-1400 mm cabinet width
최대 길이	Up to 406 mm overall cabinet depth
강철 면면 두께	1.0-1.5 mm stainless enclosure sheet
코어 밀도	Approximately 7500-7800 kg/m³ for piezoelectric ceramic transducer material
열전도도 (Thermal Conductivity)	Approximately 1.2-2.0 W/(m·K) for piezoelectric ceramic
표면 마무리	White-blue powder-coated exterior with smooth stainless wetted tank
접합 유형	Bolted service cabinet with modular transducer plates, hose outlets and threaded water port
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

3-18 kg/h modular output configurationsDirect-room blower or duct connectionReverse-osmosis water packageHumidity controller, flush cycle and remote monitoring

Planning a Ultrasonic Humidifier specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.